DescriptionThis video provides step-by-step repair instructions for replacing the clutch cable adjuster on a Toro snowblower.
All of the information for this video is applicable to the following brands:
Toro
Step-By-Step Instructions1
If the clutch cable adjuster is still intact on your snowblower, lift the clutch cable sleeve and unhook the adjuster from the bail arm spring.
2
Note which cable adjuster hole the cable is inserted into, then detach the cable from the old adjuster.
3
Install the new clutch cable adjuster by feeding the Z-end of the clutch cable through the slot in the bottom of the adjuster.
4
Then, insert the Z-end into the appropriate hole.
5
Attach the adjuster to the bail arm spring.