Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairFrigidaire Gas Range Oven Safety Valve Replacement (3203459)
Frigidaire Gas Range Oven Safety Valve Replacement (3203459)
Skill Level
Total Parts Cost
$204.60Estimated Savings
$112.5004:46
- Description
This video provides step-by-step instructions for replacing the oven safety valve on Frigidaire gas ranges.
All of the information in this video is applicable to the following brands: Frigidaire
Tools used: Channel-lock pliers and 9/16th inch wrench, flat-head screwdriver, & a 3/8th inch socket or nut driver.
All of the information in this video is applicable to the following brands: Frigidaire
Tools used: Channel-lock pliers and 9/16th inch wrench, flat-head screwdriver, & a 3/8th inch socket or nut driver.
Step By Step Instructions
1
Before you replace the oven safety valve in your gas range,
2
Be sure to unplug the power cord or shut off the power supply.
3
Shut off the gas supply as well.
4
Have an assistant help you to move the range away from the wall.
5
Use channel lock pliers and a 9/16 inch wrench to unthread the nut securing the gas supply tube to the safety valve.
6
Next, fully open the oven door and rotate both door hinge locks back.
7
Partially close the door, then lift and pull the door toward you to remove.
8
Slide out the oven racks.
9
Use a flathead screwdriver to unthread the two rear screws securing the oven's bottom panel.
10
Lift the panel up from the back to remove.
11
Using a 3/8 inch socket or nut driver, unthread the nut to release the burner shield.
12
Detach the igniter wires from the oven safety valve terminals.
13
Unthread the two mounting screws to release the burner tube and set the tube aside.
14
Next, unthread the screw in the front securing the valve mounting bracket to the base.
15
Slide the bracket forward to remove the old safety valve.
16
Install the new oven safety valve by aligning the mounting bracket.
17
Then, slide the bracket into the slots in the base.
18
Thread the front screw.
19
Realign the burner tube on the safety valve orifice and frame, then thread the screws.
20
Attach the igniter wires to the safety valve terminals.
21
Realign the burner shield and rethread the nut.
22
Reinstall the bottom panel by aligning the front edge first.
23
Rethread the two rear screws.
24
Replace the oven racks.
25
Reinstall the oven door by inserting the door hinges into the hinge slots at a 45-degree angle.
26
Lower the door to its fully open position, then rotate the hinge locks forward.
27
Returning to the rear of the appliance, thread the nut to secure the gas supply tube to the oven safety valve.
28
Avoid over-tightening the nut.
29
Move the appliance back against the wall.
30
Turn the gas supply back on.
31
Plug the power cord back in or restore the power supply, and your gas range should be ready for use.
Description
This video provides step-by-step instructions for replacing the oven safety valve on Frigidaire gas ranges.
All of the information in this video is applicable to the following brands: Frigidaire
Tools used: Channel-lock pliers and 9/16th inch wrench, flat-head screwdriver, & a 3/8th inch socket or nut driver.
All of the information in this video is applicable to the following brands: Frigidaire
Tools used: Channel-lock pliers and 9/16th inch wrench, flat-head screwdriver, & a 3/8th inch socket or nut driver.
Step-By-Step Instructions
1
Before you replace the oven safety valve in your gas range,
2
Be sure to unplug the power cord or shut off the power supply.
3
Shut off the gas supply as well.
4
Have an assistant help you to move the range away from the wall.
5
Use channel lock pliers and a 9/16 inch wrench to unthread the nut securing the gas supply tube to the safety valve.
6
Next, fully open the oven door and rotate both door hinge locks back.
7
Partially close the door, then lift and pull the door toward you to remove.
8
Slide out the oven racks.
9
Use a flathead screwdriver to unthread the two rear screws securing the oven's bottom panel.
10
Lift the panel up from the back to remove.
11
Using a 3/8 inch socket or nut driver, unthread the nut to release the burner shield.
12
Detach the igniter wires from the oven safety valve terminals.
13
Unthread the two mounting screws to release the burner tube and set the tube aside.
14
Next, unthread the screw in the front securing the valve mounting bracket to the base.
15
Slide the bracket forward to remove the old safety valve.
16
Install the new oven safety valve by aligning the mounting bracket.
17
Then, slide the bracket into the slots in the base.
18
Thread the front screw.
19
Realign the burner tube on the safety valve orifice and frame, then thread the screws.
20
Attach the igniter wires to the safety valve terminals.
21
Realign the burner shield and rethread the nut.
22
Reinstall the bottom panel by aligning the front edge first.
23
Rethread the two rear screws.
24
Replace the oven racks.
25
Reinstall the oven door by inserting the door hinges into the hinge slots at a 45-degree angle.
26
Lower the door to its fully open position, then rotate the hinge locks forward.
27
Returning to the rear of the appliance, thread the nut to secure the gas supply tube to the oven safety valve.
28
Avoid over-tightening the nut.
29
Move the appliance back against the wall.
30
Turn the gas supply back on.
31
Plug the power cord back in or restore the power supply, and your gas range should be ready for use.
Applicable Product Model
Related Articles & Videos
01:25
Part Replacement
Frigidaire Gas Range Right Front Burner Base Replacement (316438400)
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com