Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairElectrolux Front-Load Washer Door Boot Seal Replacement (part 5304505004)
Electrolux Front-Load Washer Door Boot Seal Replacement (part 5304505004)
Skill Level
Total Parts Cost
$90.75Estimated Savings
$112.5007:53
- Description
This video provides step-by-step instructions for replacing the door boot seal on Electrolux washing machine. The most common reason for replacing the door boot seal is when the washing machine is leaking water.
All of the information in this door boot seal replacement video is applicable to the following brands: Electrolux
Tools used: Phillips-head screwdriver or Number two square drive bit, needle-nose pliers, & a 7/16th inch socket.
All of the information in this door boot seal replacement video is applicable to the following brands: Electrolux
Tools used: Phillips-head screwdriver or Number two square drive bit, needle-nose pliers, & a 7/16th inch socket.
Step By Step Instructions
1
Electrolux Front-Load Washer - Model PR4931397DoorBootSealModEFLS627UTT
2
Front-Load Washer Door Boot Seal Replacement
3
Tools & Assistance Needed
4
"You will need a Philips-head screwdriver, needle-nose pliers, a 7/16th inch socket, new zip ties, and clamps (if necessary) for this procedure, and you may need assistance."
5
Be sure to unplug the power cord.
6
Have an assistant help you to move the appliance away from the wall.
7
"Using a Philips-head screwdriver or a number two square drive bit, unthread the rear screws securing the top panel."
8
Remove the panel.
9
Use needle-nose pliers to help extend the spring to remove the retainer from the door boot seal.
10
Peel the boot seal off the lip of the front panel.
11
Lift and support the front of the washer.
12
Unthread the four screws securing the bottom of the front panel.
13
Pull out the dispenser drawer and depress the tab to fully release.
14
Unthread the two larger screws inside the dispenser drawer housing.
15
Unthread the three screws securing the top of the front panel.
16
Lift the front panel up and out to detach.
17
Disconnect the two wire connecters to fully remove the panel.
18
Use a 7/16th inch socket to unthread the four bolts securing the lower counter-balance weight.
19
Set the weight aside.
20
Remove the light assembly from the boot seal.
21
Cut the zip ties securing the dispenser hose and the recirculation tube to the boot seal.
22
Pull the hose and tube free.
23
Pull the old boot seal and spring off of the outer tub.
24
"To install the new door boot seal, keeping the ports at the top, align the arrow with the top of the tub, and position the lip of the boot seal on the rim of the outer tub."
25
"Once the boot seal is in place, position the retainer spring to secure the boot seal – you can use clamps to help hold the spring in place as you fully align it."
26
Insert the dispenser hose and the recirculation tube into the appropriate ports.
27
Use new zip ties to secure.
28
Position the light assembly.
29
Reposition the counter-balance weight on the outer tub and thread the mounting bolts.
30
Reinstall the front panel by first connecting the control board wire connecter and the door latch wire connecter.
31
Align the panel on the mounting pins and push down.
32
Rethread the three screws on top.
33
Replace the screws in the dispenser drawer housing.
34
Reinstall the dispenser drawer.
35
Rethread the four screws to secure the bottom of the front panel.
36
Remove the support.
37
Realign the door boot seal on the lip of the front panel.
38
Secure it with the retainer by aligning the spring at the top then insert it into the groove of the boot seal.
39
Realign the top panel and secure it with the screws at the rear.
40
Move the appliance back against the wall.
41
Plug the power cord back in.
42
Congrats! Your front-load washer is ready for use.
Description
This video provides step-by-step instructions for replacing the door boot seal on Electrolux washing machine. The most common reason for replacing the door boot seal is when the washing machine is leaking water.
All of the information in this door boot seal replacement video is applicable to the following brands: Electrolux
Tools used: Phillips-head screwdriver or Number two square drive bit, needle-nose pliers, & a 7/16th inch socket.
All of the information in this door boot seal replacement video is applicable to the following brands: Electrolux
Tools used: Phillips-head screwdriver or Number two square drive bit, needle-nose pliers, & a 7/16th inch socket.
Step-By-Step Instructions
1
Electrolux Front-Load Washer - Model PR4931397DoorBootSealModEFLS627UTT
2
Front-Load Washer Door Boot Seal Replacement
3
Tools & Assistance Needed
4
"You will need a Philips-head screwdriver, needle-nose pliers, a 7/16th inch socket, new zip ties, and clamps (if necessary) for this procedure, and you may need assistance."
5
Be sure to unplug the power cord.
6
Have an assistant help you to move the appliance away from the wall.
7
"Using a Philips-head screwdriver or a number two square drive bit, unthread the rear screws securing the top panel."
8
Remove the panel.
9
Use needle-nose pliers to help extend the spring to remove the retainer from the door boot seal.
10
Peel the boot seal off the lip of the front panel.
11
Lift and support the front of the washer.
12
Unthread the four screws securing the bottom of the front panel.
13
Pull out the dispenser drawer and depress the tab to fully release.
14
Unthread the two larger screws inside the dispenser drawer housing.
15
Unthread the three screws securing the top of the front panel.
16
Lift the front panel up and out to detach.
17
Disconnect the two wire connecters to fully remove the panel.
18
Use a 7/16th inch socket to unthread the four bolts securing the lower counter-balance weight.
19
Set the weight aside.
20
Remove the light assembly from the boot seal.
21
Cut the zip ties securing the dispenser hose and the recirculation tube to the boot seal.
22
Pull the hose and tube free.
23
Pull the old boot seal and spring off of the outer tub.
24
"To install the new door boot seal, keeping the ports at the top, align the arrow with the top of the tub, and position the lip of the boot seal on the rim of the outer tub."
25
"Once the boot seal is in place, position the retainer spring to secure the boot seal – you can use clamps to help hold the spring in place as you fully align it."
26
Insert the dispenser hose and the recirculation tube into the appropriate ports.
27
Use new zip ties to secure.
28
Position the light assembly.
29
Reposition the counter-balance weight on the outer tub and thread the mounting bolts.
30
Reinstall the front panel by first connecting the control board wire connecter and the door latch wire connecter.
31
Align the panel on the mounting pins and push down.
32
Rethread the three screws on top.
33
Replace the screws in the dispenser drawer housing.
34
Reinstall the dispenser drawer.
35
Rethread the four screws to secure the bottom of the front panel.
36
Remove the support.
37
Realign the door boot seal on the lip of the front panel.
38
Secure it with the retainer by aligning the spring at the top then insert it into the groove of the boot seal.
39
Realign the top panel and secure it with the screws at the rear.
40
Move the appliance back against the wall.
41
Plug the power cord back in.
42
Congrats! Your front-load washer is ready for use.
Applicable Product Model
Related Articles & Videos
08:08
Part Replacement
Electrolux Front-Load Washer Sump Filter Replacement (part 5304505165)
06:59
Part Replacement
Electrolux Front-Load Washer Drain Pump Assembly Replacement (part 5304514775)
04:11
Part Replacement
Electrolux Front-Load Washer Water Valve Assembly Replacement (part 5304514790)
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com