Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairMaytag Stove Burner Not Lighting? Spark Module #7431P064-60
Maytag Stove Burner Not Lighting? Spark Module #7431P064-60
Skill Level
Total Parts Cost
$180.79Estimated Savings
$112.5002:31
- Description
This video provides step-by-step instructions for replacing the spark module on Maytag gas stovetops. The most common reasons for replacing the spark module are when it doesn’t produce sparks, produces only a weak or intermittent spark, or produces sparks all the time.
All of the information in this spark module video is applicable to the following brands: Maytag, Whirlpool, Jenn Air, Ikea
Tools used: screwdriver
All of the information in this spark module video is applicable to the following brands: Maytag, Whirlpool, Jenn Air, Ikea
Tools used: screwdriver
Step By Step Instructions
1
Before you begin this repair, be sure to unplug the appliance
2
Turn off the gas supply.
3
Your first step is to remove all four burner valve knobs.
4
Now, remove all of the burner grates and caps.
5
Next, uninstall the screws securing the burner bases and pull the bases off.
6
Now lift the main top off.
7
Disconnect the wires from the old spark module.
8
Uninstall the mounting screws securing the old module and remove the module from the appliance.
9
Install the new spark module
10
By aligning the module with the screw holes and securing it with the mounting screws.
11
Now connect the wires.
12
Replace the main top making sure the orifice holders align with the holes.
13
Replace the burner bases by lining up the electrodes with the slot or hole in each base and secure each of them with the screws.
14
Replace the burner caps grates and burner valve knobs.
15
You’re now ready to turn the gas supply back on plug the appliance back in and check the stove-top to make sure it’s functioning properly.
Description
This video provides step-by-step instructions for replacing the spark module on Maytag gas stovetops. The most common reasons for replacing the spark module are when it doesn’t produce sparks, produces only a weak or intermittent spark, or produces sparks all the time.
All of the information in this spark module video is applicable to the following brands: Maytag, Whirlpool, Jenn Air, Ikea
Tools used: screwdriver
All of the information in this spark module video is applicable to the following brands: Maytag, Whirlpool, Jenn Air, Ikea
Tools used: screwdriver
Step-By-Step Instructions
1
Before you begin this repair, be sure to unplug the appliance
2
Turn off the gas supply.
3
Your first step is to remove all four burner valve knobs.
4
Now, remove all of the burner grates and caps.
5
Next, uninstall the screws securing the burner bases and pull the bases off.
6
Now lift the main top off.
7
Disconnect the wires from the old spark module.
8
Uninstall the mounting screws securing the old module and remove the module from the appliance.
9
Install the new spark module
10
By aligning the module with the screw holes and securing it with the mounting screws.
11
Now connect the wires.
12
Replace the main top making sure the orifice holders align with the holes.
13
Replace the burner bases by lining up the electrodes with the slot or hole in each base and secure each of them with the screws.
14
Replace the burner caps grates and burner valve knobs.
15
You’re now ready to turn the gas supply back on plug the appliance back in and check the stove-top to make sure it’s functioning properly.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com