Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairTroy-Bilt Lawn Mower Bail Arm Replacement (931-05291)
Troy-Bilt Lawn Mower Bail Arm Replacement (931-05291)
Skill Level
Total Parts Cost
$45.98Estimated Savings
$112.5001:00
- Description
This video provides step-by-step repair instructions for replacing the bail arm on a Troy-Bilt lawn mower (model 12AVB2RQ766). The most common reason for replacing this part is if it is damaged.
All of the information for this replacement video is applicable to the following brands:
Troy-Bilt
All of the information for this replacement video is applicable to the following brands:
Troy-Bilt
Step By Step Instructions
1
To replace the bale arm on your Troy-Built lawn mower, squeeze the old bay alarm to release the left side from the upper handle.
2
Detach the brake control cable from the arm.
3
Now, rotate the old bail arm upwards to detach the right side from the upper handle.
4
To install the new bail arm, first insert the right side of the arm into the right middle hole of the upper handle.
5
Insert the Z end of the brake control cable into the hole in the arm.
6
Then, insert the left side of the arm into the upper hole in the handle.
7
Confirm that the new bail arm moves freely, and your lawn mower should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the bail arm on a Troy-Bilt lawn mower (model 12AVB2RQ766). The most common reason for replacing this part is if it is damaged.
All of the information for this replacement video is applicable to the following brands:
Troy-Bilt
All of the information for this replacement video is applicable to the following brands:
Troy-Bilt
Step-By-Step Instructions
1
To replace the bale arm on your Troy-Built lawn mower, squeeze the old bay alarm to release the left side from the upper handle.
2
Detach the brake control cable from the arm.
3
Now, rotate the old bail arm upwards to detach the right side from the upper handle.
4
To install the new bail arm, first insert the right side of the arm into the right middle hole of the upper handle.
5
Insert the Z end of the brake control cable into the hole in the arm.
6
Then, insert the left side of the arm into the upper hole in the handle.
7
Confirm that the new bail arm moves freely, and your lawn mower should be ready for use.
Applicable Product Model
Parts Needed
Bail Control Arm
$45.98
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com