Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairTroy-Bilt Lawn Mower Drive Control Handle Assembly Replacement (753-06060A)
Troy-Bilt Lawn Mower Drive Control Handle Assembly Replacement (753-06060A)
Skill Level
Total Parts Cost
$32.94Estimated Savings
$112.5002:17
- Description
This video provides step-by-step repair instructions for replacing the drive control handle assembly on a Troy-Bilt lawn mower (model 12AVB2RQ766). The most common reason for replacing this part is if the self-driving feature is not working properly.
All of the information for this replacement video is applicable to the following brands:
Troy-Bilt
All of the information for this replacement video is applicable to the following brands:
Troy-Bilt
Step By Step Instructions
1
Troy-bilt Lawn Mower - Model 12AVB2RQ766
2
Lawn Mower Drive Control Handle Replacement
3
Tools Needed
4
You will need a Philips-head screwdriver and a small flat-head screwdriver for this procedure.
5
Use the Philips-head screwdriver to unthread the four screws securing the drive control handle housing.
6
Detach the housing from the upper handle, then insert the small flat-head screwdriver into the hole in the housing and depress the tab to fully separate the housing.
7
Detach the end of the drive control cable from the handle and set the old assembly aside.
8
To prepare the new drive control handle for installation, align the handle on the upper housing stud so the cable notch faces away from the housing, and snap it into place.
9
Attach the control cable to the drive control handle, position the adjuster, then align the bottom portion of the housing and snap the lower section into place.
10
Position the new assembly on the upper handle.
11
Thread the four screws to secure.
12
Confirm the drive control handle moves freely.
13
Congrats! Your lawn mower is ready for use.
Description
This video provides step-by-step repair instructions for replacing the drive control handle assembly on a Troy-Bilt lawn mower (model 12AVB2RQ766). The most common reason for replacing this part is if the self-driving feature is not working properly.
All of the information for this replacement video is applicable to the following brands:
Troy-Bilt
All of the information for this replacement video is applicable to the following brands:
Troy-Bilt
Step-By-Step Instructions
1
Troy-bilt Lawn Mower - Model 12AVB2RQ766
2
Lawn Mower Drive Control Handle Replacement
3
Tools Needed
4
You will need a Philips-head screwdriver and a small flat-head screwdriver for this procedure.
5
Use the Philips-head screwdriver to unthread the four screws securing the drive control handle housing.
6
Detach the housing from the upper handle, then insert the small flat-head screwdriver into the hole in the housing and depress the tab to fully separate the housing.
7
Detach the end of the drive control cable from the handle and set the old assembly aside.
8
To prepare the new drive control handle for installation, align the handle on the upper housing stud so the cable notch faces away from the housing, and snap it into place.
9
Attach the control cable to the drive control handle, position the adjuster, then align the bottom portion of the housing and snap the lower section into place.
10
Position the new assembly on the upper handle.
11
Thread the four screws to secure.
12
Confirm the drive control handle moves freely.
13
Congrats! Your lawn mower is ready for use.
Applicable Product Model
Parts Needed
Handle
$32.94
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com