Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairHonda Small Engine Carburetor-To-Shut-Off Fuel Line Replacement #16840-Z8B-900
Honda Small Engine Carburetor-To-Shut-Off Fuel Line Replacement #16840-Z8B-900
Skill Level
Total Parts Cost
$4.12Estimated Savings
$112.5003:57
- Description
This video provides step-by-step instructions for replacing the carburetor-to-shut-off fuel line on Honda small engines. The most common reason for replacing this part is if the engine is leaking.
All of the information in this video is applicable to the following brands: Honda
All of the information in this video is applicable to the following brands: Honda
Step By Step Instructions
1
To replace the fuel line between the shut off valve and carburetor on your Honda engine, you will need a 10 millimeter socket and a small flat head screwdriver.
2
Before you begin the procedure, make sure the engine has cooled and shut off the fuel valve.
3
Depress the retaining tabs to release the air filter cover and remove the filter.
4
Use the 10 millimeter socket to unthread the two mounting bolts securing the air filter housing and carburetor.
5
Detach the housing from the breather tube to move the housing out of the way.
6
Use the small flathead screwdriver to help release the two spring clamps so you can detach the old fuel line from the carburetor and the fuel shut off valve.
7
To install the new fuel line, attach one end of the new line to the fuel shutoff valve port and the opposite end to the carburetor fuel intake port.
8
Position the two spring clamps to secure the new line if necessary.
9
Reinstall the air filter housing and carburetor assembly by first attaching the breather tube to the housing port.
10
Next, insert the mounting bolts, align the air filter housing gasket, making sure the small hole in the gasket is at the top near the left mounting bolt.
11
The carburetor should be slid onto the mounting bolts next.
12
Position the air guide, keeping the small hole near the right mounting bolt.
13
Now align the auto choke insulator with the plunger facing outward, align the insulator gasket, then position the entire assembly on the engine housing and thread the bolts to secure.
14
Reinstall the air filter, making sure the filter's rubber seal is secure in the housing.
15
Insert the cover tabs into the housing slots and snap the cover into place.
16
With the repair completed, open the fuel valve and your engine should be ready for use.
Description
This video provides step-by-step instructions for replacing the carburetor-to-shut-off fuel line on Honda small engines. The most common reason for replacing this part is if the engine is leaking.
All of the information in this video is applicable to the following brands: Honda
All of the information in this video is applicable to the following brands: Honda
Step-By-Step Instructions
1
To replace the fuel line between the shut off valve and carburetor on your Honda engine, you will need a 10 millimeter socket and a small flat head screwdriver.
2
Before you begin the procedure, make sure the engine has cooled and shut off the fuel valve.
3
Depress the retaining tabs to release the air filter cover and remove the filter.
4
Use the 10 millimeter socket to unthread the two mounting bolts securing the air filter housing and carburetor.
5
Detach the housing from the breather tube to move the housing out of the way.
6
Use the small flathead screwdriver to help release the two spring clamps so you can detach the old fuel line from the carburetor and the fuel shut off valve.
7
To install the new fuel line, attach one end of the new line to the fuel shutoff valve port and the opposite end to the carburetor fuel intake port.
8
Position the two spring clamps to secure the new line if necessary.
9
Reinstall the air filter housing and carburetor assembly by first attaching the breather tube to the housing port.
10
Next, insert the mounting bolts, align the air filter housing gasket, making sure the small hole in the gasket is at the top near the left mounting bolt.
11
The carburetor should be slid onto the mounting bolts next.
12
Position the air guide, keeping the small hole near the right mounting bolt.
13
Now align the auto choke insulator with the plunger facing outward, align the insulator gasket, then position the entire assembly on the engine housing and thread the bolts to secure.
14
Reinstall the air filter, making sure the filter's rubber seal is secure in the housing.
15
Insert the cover tabs into the housing slots and snap the cover into place.
16
With the repair completed, open the fuel valve and your engine should be ready for use.
Applicable Product Model
Parts Needed
Fuel Line
$4.12
Total$0.00
Related Articles & Videos
01:44
Part Replacement
Honda Small Engine Shut-Off-To-Tank Fuel Line Replacement #17700-Z8B-900
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com