Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairFrigidaire Electric Laundry Center User Interface Jumper Wire Replacement 5304520297 
Frigidaire Electric Laundry Center User Interface Jumper Wire Replacement 5304520297
Skill Level
Total Parts Cost
$27.08Estimated Savings
$112.5002:52
- Description
This video provides step-by-step repair instructions for replacing the user interface jumper wire on a Frigidaire electric washer/dryer laundry center (model FFLE3900UW1). The most common reason for replacing this part is if the washer or dryer buttons are not responding.
This replacement video is applicable to the following brands:
Frigidaire
Don't forget to like and comment on this video and subscribe to our channel!
This replacement video is applicable to the following brands:
Frigidaire
Don't forget to like and comment on this video and subscribe to our channel!
Step By Step Instructions
1
Laundry Center- Model FFLE3900UW1
2
Laundry Center User Interface Jumper Wire Harness Replacement
3
Step 1: Gather a number two square drive bit or a phillips-head screwdriver.
4
Step 2: Unplug the power cord.
5
Step 3: Use the number two square drive bit or the phillips-head screwdriver to unthread the two screws securing the dryer's lower access panel.
6
Step 4: Pull the panel up to remove.
7
Step 5: Unthread the two mounting screws securing the control panel.
8
Step 6: Pull the panel down to detach.
9
Step 7: Release the wires from the retaining clip and set the panel on a towel or blanket.
10
"Step 8: If still intact, depress the tabs to release the old jumper harness from the washer user interface board and the dryer interface board. "
11
"Step 9: To install the new jumper wire harness, connect one connecter to the washer interface board and the opposite connecter to the dryer board."
12
Step 10: Secure the wire in the retaining clips.
13
Step 11: Secure the main wire harness in the retaining clip then reposition the control panel.
14
Step 12: Replace the mounting screws.
15
Step 13: Realign the access panel and secure it with the screws.
16
Step 14: Plug the power cord back in.
17
Congratulations! Your laundry center should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the user interface jumper wire on a Frigidaire electric washer/dryer laundry center (model FFLE3900UW1). The most common reason for replacing this part is if the washer or dryer buttons are not responding.
This replacement video is applicable to the following brands:
Frigidaire
Don't forget to like and comment on this video and subscribe to our channel!
This replacement video is applicable to the following brands:
Frigidaire
Don't forget to like and comment on this video and subscribe to our channel!
Step-By-Step Instructions
1
Laundry Center- Model FFLE3900UW1
2
Laundry Center User Interface Jumper Wire Harness Replacement
3
Step 1: Gather a number two square drive bit or a phillips-head screwdriver.
4
Step 2: Unplug the power cord.
5
Step 3: Use the number two square drive bit or the phillips-head screwdriver to unthread the two screws securing the dryer's lower access panel.
6
Step 4: Pull the panel up to remove.
7
Step 5: Unthread the two mounting screws securing the control panel.
8
Step 6: Pull the panel down to detach.
9
Step 7: Release the wires from the retaining clip and set the panel on a towel or blanket.
10
"Step 8: If still intact, depress the tabs to release the old jumper harness from the washer user interface board and the dryer interface board. "
11
"Step 9: To install the new jumper wire harness, connect one connecter to the washer interface board and the opposite connecter to the dryer board."
12
Step 10: Secure the wire in the retaining clips.
13
Step 11: Secure the main wire harness in the retaining clip then reposition the control panel.
14
Step 12: Replace the mounting screws.
15
Step 13: Realign the access panel and secure it with the screws.
16
Step 14: Plug the power cord back in.
17
Congratulations! Your laundry center should be ready for use.
Applicable Product Model
Parts Needed
Wire Harness
$27.08
Total$0.00
Related Articles & Videos
07:04
Part Replacement
Frigidaire Electric Laundry Center Dryer Drum Belt Replacement (134503600)
10:24
Part Replacement
Frigidaire Electric Laundry Center Heater Assembly Replacement (137392702)
09:35
Part Replacement
Frigidaire Electric Laundry Center Dryer Drum Bearing Replacement (131777700)
18:36
Part Replacement
Frigidaire Laundry Center Washer Transmission Assembly Replacement (5304517318)
04:37
Part Replacement
Frigidaire Laundry Center Water Inlet Valve Replacement (5304515818)
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com