Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairFrigidaire Electric Laundry Center Belt Switch Replacement 5304521496 
Frigidaire Electric Laundry Center Belt Switch Replacement 5304521496
Skill Level
Total Parts Cost
$16.91Estimated Savings
$112.5003:13
- Description
This video provides step-by-step repair instructions for replacing the belt switch on a Frigidaire electric washer/dryer laundry center (model FFLE3900UW1). The most common reason for replacing this part is if the dryer drum will not spin.
This replacement video is applicable to the following brands:
Frigidaire
Don't forget to like and comment on this video and subscribe to our channel!
This replacement video is applicable to the following brands:
Frigidaire
Don't forget to like and comment on this video and subscribe to our channel!
Step By Step Instructions
1
Laundry Center- Model FFLE3900UW1
2
Laundry Center Dryer Drum Belt Switch Replacement
3
Step 1: Gather a number two square drive bit or a phillips-head screwdriver and needle-nose pliers.
4
Step 2: Unplug the power cord.
5
Step 3: Have an assistant help you to move the appliance away from the wall or out of the closet.
6
Step 4: Detach the venting from the dryer to fully access the rear of the laundry center.
7
Step 5: Shut off the incoming water and remove the hot and cold water supply lines as well.
8
"Step 6: If necessary, remove the drain hose from the standpipe or laundry tub. "
9
Step 7: Use the number two square drive bit or the phillips-head screwdriver to unthread the two screws securing the dryer access panel.
10
Step 8: Set the panel aside.
11
Step 9: Pull the mounting bracket retaining tabs outward to release the old belt switch.
12
Step 10: Use the needle-nose pliers to help disconnect the wires.
13
"Step 11: To install the new belt switch, connect the wires to the terminals."
14
"Step 12: With the switch actuator facing the idler arm, snap the switch into place in the mounting bracket. "
15
Step 13: Reinstall the access panel by insertinf the tabs into the slots first then rethread the screws.
16
"Step 14: If necessary, reinsert the drain hose into the standpipe or hook it onto the edge of the tub. "
17
Step 15: Reattach the hot and cold water supply lines to the inlet valve ports.
18
Step 16: Reattach the venting if required and move the appliance back against the wall or into the closet.
19
Step 17: Turn the water supply back on if necessary.
20
Step 18: Plug the power cord back in.
21
Congratulations! Your laundry center should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the belt switch on a Frigidaire electric washer/dryer laundry center (model FFLE3900UW1). The most common reason for replacing this part is if the dryer drum will not spin.
This replacement video is applicable to the following brands:
Frigidaire
Don't forget to like and comment on this video and subscribe to our channel!
This replacement video is applicable to the following brands:
Frigidaire
Don't forget to like and comment on this video and subscribe to our channel!
Step-By-Step Instructions
1
Laundry Center- Model FFLE3900UW1
2
Laundry Center Dryer Drum Belt Switch Replacement
3
Step 1: Gather a number two square drive bit or a phillips-head screwdriver and needle-nose pliers.
4
Step 2: Unplug the power cord.
5
Step 3: Have an assistant help you to move the appliance away from the wall or out of the closet.
6
Step 4: Detach the venting from the dryer to fully access the rear of the laundry center.
7
Step 5: Shut off the incoming water and remove the hot and cold water supply lines as well.
8
"Step 6: If necessary, remove the drain hose from the standpipe or laundry tub. "
9
Step 7: Use the number two square drive bit or the phillips-head screwdriver to unthread the two screws securing the dryer access panel.
10
Step 8: Set the panel aside.
11
Step 9: Pull the mounting bracket retaining tabs outward to release the old belt switch.
12
Step 10: Use the needle-nose pliers to help disconnect the wires.
13
"Step 11: To install the new belt switch, connect the wires to the terminals."
14
"Step 12: With the switch actuator facing the idler arm, snap the switch into place in the mounting bracket. "
15
Step 13: Reinstall the access panel by insertinf the tabs into the slots first then rethread the screws.
16
"Step 14: If necessary, reinsert the drain hose into the standpipe or hook it onto the edge of the tub. "
17
Step 15: Reattach the hot and cold water supply lines to the inlet valve ports.
18
Step 16: Reattach the venting if required and move the appliance back against the wall or into the closet.
19
Step 17: Turn the water supply back on if necessary.
20
Step 18: Plug the power cord back in.
21
Congratulations! Your laundry center should be ready for use.
Applicable Product Model
Parts Needed
Belt Switch
$16.91
Total$0.00
Related Articles & Videos
07:04
Part Replacement
Frigidaire Electric Laundry Center Dryer Drum Belt Replacement (134503600)
10:24
Part Replacement
Frigidaire Electric Laundry Center Heater Assembly Replacement (137392702)
09:35
Part Replacement
Frigidaire Electric Laundry Center Dryer Drum Bearing Replacement (131777700)
18:36
Part Replacement
Frigidaire Laundry Center Washer Transmission Assembly Replacement (5304517318)
04:37
Part Replacement
Frigidaire Laundry Center Water Inlet Valve Replacement (5304515818)
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com