Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairFrigidaire Electric Laundry Center Dryer Temperature Button Replacement (5304515793) 
Frigidaire Electric Laundry Center Dryer Temperature Button Replacement (5304515793)
Skill Level
Total Parts Cost
$6.95Estimated Savings
$112.5004:12
- Description
This video provides step-by-step repair instructions for replacing the dryer temperature button on a Frigidaire electric washer/dryer laundry center (model FFLE3900UW1). The most common reason for replacing this part is if it is damaged or missing.
This replacement video is applicable to the following brands:
Frigidaire
Don't forget to like and comment on this video and subscribe to our channel!
This replacement video is applicable to the following brands:
Frigidaire
Don't forget to like and comment on this video and subscribe to our channel!
Step By Step Instructions
1
Laundry Center- Model FFLE3900UW1
2
Laundry Center Dryer Temperature Button Replacement
3
"Step 1: Gather a number two square drive bit, a phillips-head screwdriver, and a small flat-head screwdriver. "
4
Step 2: Unplug the power cord.
5
Step 3: Use the number two square drive bit or the phillips-head screwdriver to unthread the two screws securing the dryer's lower access panel.
6
Step 4: Pull the panel up to remove.
7
Step 5: Unthread the two mounting screws securing the control panel.
8
Step 6: Pull the panel down to detach.
9
Step 7: Release the wires from the retaining clip and set the panel on a towel or blanket.
10
Step 8: Use the phillips-head screwdriver to unthread the four mounting screws securing the dryer's user interface board.
11
Step 9: Pull off the selector knob.
12
Step 10: Pull the retaining tabs back to release the use interface board.
13
Step 11: Use the small flat-head screwdriver to pull back the tabs to release the button support and remove the old dryer temperature button.
14
Step 12: Align the new button in the control panel.
15
Step 13: Confirm the other buttons are in place then reposition the button support and snap it into place.
16
Step 14: Realign the user interface board and snap it into position.
17
Step 15: Rethread the four screws to secure.
18
Step 16: Replace the selector knob.
19
Step 17: Secure the wires in the retaining clip then reposition the control panel.
20
Step 18: Replace the mounting screws.
21
Step 19: Realign the access panel and secure it with the screws.
22
Step 20: Plug the power cord back in.
23
Congratulations! Your laundry center should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the dryer temperature button on a Frigidaire electric washer/dryer laundry center (model FFLE3900UW1). The most common reason for replacing this part is if it is damaged or missing.
This replacement video is applicable to the following brands:
Frigidaire
Don't forget to like and comment on this video and subscribe to our channel!
This replacement video is applicable to the following brands:
Frigidaire
Don't forget to like and comment on this video and subscribe to our channel!
Step-By-Step Instructions
1
Laundry Center- Model FFLE3900UW1
2
Laundry Center Dryer Temperature Button Replacement
3
"Step 1: Gather a number two square drive bit, a phillips-head screwdriver, and a small flat-head screwdriver. "
4
Step 2: Unplug the power cord.
5
Step 3: Use the number two square drive bit or the phillips-head screwdriver to unthread the two screws securing the dryer's lower access panel.
6
Step 4: Pull the panel up to remove.
7
Step 5: Unthread the two mounting screws securing the control panel.
8
Step 6: Pull the panel down to detach.
9
Step 7: Release the wires from the retaining clip and set the panel on a towel or blanket.
10
Step 8: Use the phillips-head screwdriver to unthread the four mounting screws securing the dryer's user interface board.
11
Step 9: Pull off the selector knob.
12
Step 10: Pull the retaining tabs back to release the use interface board.
13
Step 11: Use the small flat-head screwdriver to pull back the tabs to release the button support and remove the old dryer temperature button.
14
Step 12: Align the new button in the control panel.
15
Step 13: Confirm the other buttons are in place then reposition the button support and snap it into place.
16
Step 14: Realign the user interface board and snap it into position.
17
Step 15: Rethread the four screws to secure.
18
Step 16: Replace the selector knob.
19
Step 17: Secure the wires in the retaining clip then reposition the control panel.
20
Step 18: Replace the mounting screws.
21
Step 19: Realign the access panel and secure it with the screws.
22
Step 20: Plug the power cord back in.
23
Congratulations! Your laundry center should be ready for use.
Applicable Product Model
Parts Needed
Button
$6.95
Total$0.00
Related Articles & Videos
07:04
Part Replacement
Frigidaire Electric Laundry Center Dryer Drum Belt Replacement (134503600)
10:24
Part Replacement
Frigidaire Electric Laundry Center Heater Assembly Replacement (137392702)
09:35
Part Replacement
Frigidaire Electric Laundry Center Dryer Drum Bearing Replacement (131777700)
18:36
Part Replacement
Frigidaire Laundry Center Washer Transmission Assembly Replacement (5304517318)
04:37
Part Replacement
Frigidaire Laundry Center Water Inlet Valve Replacement (5304515818)
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com