Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairFrigidaire Laundry Center Washer Belt Cover Replacement (316472026)
Frigidaire Laundry Center Washer Belt Cover Replacement (316472026)
Skill Level
Total Parts Cost
$115.63Estimated Savings
$112.5003:16
- Description
This video provides step-by-step repair instructions for replacing the washer belt cover on a Frigidaire electric washer/dryer laundry center (model FFLE3900UW1). The most common reason for replacing this part is if it is damaged or missing.
This replacement video is applicable to the following brands:
Frigidaire
Don't forget to like and comment on this video and subscribe to our channel!
This replacement video is applicable to the following brands:
Frigidaire
Don't forget to like and comment on this video and subscribe to our channel!
Step By Step Instructions
1
To replace the washer belt cover in your frigidaire laundry center…
2
… you will need a 10mm socket.
3
Before you begin the procedure, unplug the power cord…
4
… and shut off the incoming water supply.
5
Have an assistant help you to move the appliance away from the wall or out of the closet.
6
Detach the venting from the dryer.
7
Remove the hot and cold-water supply lines from the inlet valve – be prepared for some water to spill.
8
Remove the end of the drain hose from the standpipe or laundry tub.
9
Secure the washer lid with tape.
10
Now carefully tip the appliance back so it rests on its rear panel.
11
Use the 10mm socket to unthread the four mounting screws to release the old belt cover, if still intact.
12
To install the new washer belt cover…
13
… position it over the belt and pulleys…
14
… and thread the mounting screws to secure.
15
The larger screws secure the cover to the transmission plate.
16
With the cover secured, return the laundry center to its upright position.
17
Reinsert the drain hose into the standpipe or hook it onto the edge of the tub.
18
Reattach the hot and cold-water supply lines to the inlet valve ports.
19
Reattach the venting…
20
… and move the appliance back against the wall or into the closet.
21
Turn the water supply back on…
22
… plug the power cord back in…
23
… and your laundry center should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the washer belt cover on a Frigidaire electric washer/dryer laundry center (model FFLE3900UW1). The most common reason for replacing this part is if it is damaged or missing.
This replacement video is applicable to the following brands:
Frigidaire
Don't forget to like and comment on this video and subscribe to our channel!
This replacement video is applicable to the following brands:
Frigidaire
Don't forget to like and comment on this video and subscribe to our channel!
Step-By-Step Instructions
1
To replace the washer belt cover in your frigidaire laundry center…
2
… you will need a 10mm socket.
3
Before you begin the procedure, unplug the power cord…
4
… and shut off the incoming water supply.
5
Have an assistant help you to move the appliance away from the wall or out of the closet.
6
Detach the venting from the dryer.
7
Remove the hot and cold-water supply lines from the inlet valve – be prepared for some water to spill.
8
Remove the end of the drain hose from the standpipe or laundry tub.
9
Secure the washer lid with tape.
10
Now carefully tip the appliance back so it rests on its rear panel.
11
Use the 10mm socket to unthread the four mounting screws to release the old belt cover, if still intact.
12
To install the new washer belt cover…
13
… position it over the belt and pulleys…
14
… and thread the mounting screws to secure.
15
The larger screws secure the cover to the transmission plate.
16
With the cover secured, return the laundry center to its upright position.
17
Reinsert the drain hose into the standpipe or hook it onto the edge of the tub.
18
Reattach the hot and cold-water supply lines to the inlet valve ports.
19
Reattach the venting…
20
… and move the appliance back against the wall or into the closet.
21
Turn the water supply back on…
22
… plug the power cord back in…
23
… and your laundry center should be ready for use.
Applicable Product Model
Recommended Tools and Accessories
Cooktop Cleaner
$29.50
Total$0.00
Related Articles & Videos
07:04
Part Replacement
Frigidaire Electric Laundry Center Dryer Drum Belt Replacement (134503600)
10:24
Part Replacement
Frigidaire Electric Laundry Center Heater Assembly Replacement (137392702)
09:35
Part Replacement
Frigidaire Electric Laundry Center Dryer Drum Bearing Replacement (131777700)
18:36
Part Replacement
Frigidaire Laundry Center Washer Transmission Assembly Replacement (5304517318)
04:37
Part Replacement
Frigidaire Laundry Center Water Inlet Valve Replacement (5304515818)
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com