Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairFrigidaire Laundry Center Washer Out-of-Balance Switch Bracket Replacement (5304515865)
Frigidaire Laundry Center Washer Out-of-Balance Switch Bracket Replacement (5304515865)
Skill Level
Total Parts Cost
$16.17Estimated Savings
$112.5004:17
- Description
This video provides step-by-step repair instructions for replacing the washer out-of-balance switch bracket on a Frigidaire electric washer/dryer laundry center (model FFLE3900UW1). The most common reason for replacing this part is if it is damaged or missing.
This replacement video is applicable to the following brands:
Frigidaire
Don't forget to like and comment on this video and subscribe to our channel!
This replacement video is applicable to the following brands:
Frigidaire
Don't forget to like and comment on this video and subscribe to our channel!
Step By Step Instructions
1
To replace the out-of-balance switch bracket in your Frigidaire laundry center, you will need a putty knife and a Phillips head screwdriver.
2
Before you begin the procedure, unplug the power cord.
3
Using the putty knife, release the two retaining clips securing the washer's main top.
4
Lift up the top and disconnect the lid lock assembly wire connector.
5
You can now fully remove the main top.
6
Have an assistant help you to lift and support the front of the appliance.
7
Use the Phillips head screwdriver to unthread the two screws securing the washer's front panel to the base.
8
With the screws unthreaded, remove the support, then push the panel down to fully remove.
9
Next, unthread the two mounting screws securing the out-of-balance switch and bracket to the support panel.
10
Detach the lid lock assembly wire from the bracket.
11
Depress the tabs to release the pressure sensor from the bracket.
12
Now, pull the retaining clips outward to release the out-of-balance switch.
13
You're now ready to install the new out-of-balance switch bracket.
14
Snap the switch into place on the new bracket.
15
To reinstall the assembly, snap the pressure sensor into position and secure the wire in the notch in the bracket.
16
Secure the lid lock assembly wire in the appropriate notch in the bracket as well.
17
Align the bracket on the support panel, then thread the mounting screws to secure.
18
Reinstall the front panel by aligning the tabs on the panel with the slots in the frame.
19
Then, lift the panel up until the top edge aligns with the top of the frame.
20
Support the front of the appliance, then replace the two lower screws to secure the panel.
21
Remove the support.
22
Reinstall the washer's main top by first reconnecting the lid lock wire connector.
23
Secure the wire in the retaining clip.
24
Now, slide the rear of the main top under the rear retaining clips, then realign the main top and push down to snap it into position.
25
Plug the power cord back in and your laundry center should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the washer out-of-balance switch bracket on a Frigidaire electric washer/dryer laundry center (model FFLE3900UW1). The most common reason for replacing this part is if it is damaged or missing.
This replacement video is applicable to the following brands:
Frigidaire
Don't forget to like and comment on this video and subscribe to our channel!
This replacement video is applicable to the following brands:
Frigidaire
Don't forget to like and comment on this video and subscribe to our channel!
Step-By-Step Instructions
1
To replace the out-of-balance switch bracket in your Frigidaire laundry center, you will need a putty knife and a Phillips head screwdriver.
2
Before you begin the procedure, unplug the power cord.
3
Using the putty knife, release the two retaining clips securing the washer's main top.
4
Lift up the top and disconnect the lid lock assembly wire connector.
5
You can now fully remove the main top.
6
Have an assistant help you to lift and support the front of the appliance.
7
Use the Phillips head screwdriver to unthread the two screws securing the washer's front panel to the base.
8
With the screws unthreaded, remove the support, then push the panel down to fully remove.
9
Next, unthread the two mounting screws securing the out-of-balance switch and bracket to the support panel.
10
Detach the lid lock assembly wire from the bracket.
11
Depress the tabs to release the pressure sensor from the bracket.
12
Now, pull the retaining clips outward to release the out-of-balance switch.
13
You're now ready to install the new out-of-balance switch bracket.
14
Snap the switch into place on the new bracket.
15
To reinstall the assembly, snap the pressure sensor into position and secure the wire in the notch in the bracket.
16
Secure the lid lock assembly wire in the appropriate notch in the bracket as well.
17
Align the bracket on the support panel, then thread the mounting screws to secure.
18
Reinstall the front panel by aligning the tabs on the panel with the slots in the frame.
19
Then, lift the panel up until the top edge aligns with the top of the frame.
20
Support the front of the appliance, then replace the two lower screws to secure the panel.
21
Remove the support.
22
Reinstall the washer's main top by first reconnecting the lid lock wire connector.
23
Secure the wire in the retaining clip.
24
Now, slide the rear of the main top under the rear retaining clips, then realign the main top and push down to snap it into position.
25
Plug the power cord back in and your laundry center should be ready for use.
Applicable Product Model
Related Articles & Videos
07:04
Part Replacement
Frigidaire Electric Laundry Center Dryer Drum Belt Replacement (134503600)
10:24
Part Replacement
Frigidaire Electric Laundry Center Heater Assembly Replacement (137392702)
09:35
Part Replacement
Frigidaire Electric Laundry Center Dryer Drum Bearing Replacement (131777700)
18:36
Part Replacement
Frigidaire Laundry Center Washer Transmission Assembly Replacement (5304517318)
04:37
Part Replacement
Frigidaire Laundry Center Water Inlet Valve Replacement (5304515818)
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com