Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairFrigidaire Laundry Center Washer Right Side Hinge Bar Replacement (137469900)
Frigidaire Laundry Center Washer Right Side Hinge Bar Replacement (137469900)
Skill Level
Total Parts Cost
$18.05Estimated Savings
$112.5003:04
- Description
This video provides step-by-step repair instructions for replacing the washer right side hinge bar on a Frigidaire electric washer/dryer laundry center (model FFLE3900UW1). The most common reason for replacing this part is if it is damaged or missing.
This replacement video is applicable to the following brands:
Frigidaire
Don't forget to like and comment on this video and subscribe to our channel!
This replacement video is applicable to the following brands:
Frigidaire
Don't forget to like and comment on this video and subscribe to our channel!
Step By Step Instructions
1
To replace the right-side washer lid hinge bar on your frigidaire laundry center…
2
… you will need a putty knife and a phillips-head screwdriver.
3
Before you begin the procedure, unplug the power cord.
4
Use the putty knife to release the two retaining clips securing the washer’s main top.
5
Lift up the top and disconnect the lid lock assembly wire connecter.
6
You can now fully remove the main top…
7
…and set it upside down on a towel or blanket.
8
Release the tension on the lid springs and detach the right-side spring from the main top and hinge bar.
9
Use the phillips-head screwdriver to unthread the screws securing the hinge bar to the lid.
10
Push the hinge bar through the bearing then twist the bar to remove.
11
To install the new hinge bar…
12
Insert it through the hole in the lid and bearing.
13
Twist until the bar sits flush against the inside edge of the lid.
14
Thread the screws to secure.
15
Reattach the shorter end of the lid spring to the hinge bar… and the longer end to the main top.
16
Returning to the appliance…
17
… reinstall the main top by first reconnecting the lid lock assembly wire connecter.
18
Secure the wire in the retaining clip.
19
Now slide the rear of the main top under the rear retaining clips…
20
… then realign the main top and push down to snap it into position.
21
Plug the power cord back in…
22
… and your laundry center should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the washer right side hinge bar on a Frigidaire electric washer/dryer laundry center (model FFLE3900UW1). The most common reason for replacing this part is if it is damaged or missing.
This replacement video is applicable to the following brands:
Frigidaire
Don't forget to like and comment on this video and subscribe to our channel!
This replacement video is applicable to the following brands:
Frigidaire
Don't forget to like and comment on this video and subscribe to our channel!
Step-By-Step Instructions
1
To replace the right-side washer lid hinge bar on your frigidaire laundry center…
2
… you will need a putty knife and a phillips-head screwdriver.
3
Before you begin the procedure, unplug the power cord.
4
Use the putty knife to release the two retaining clips securing the washer’s main top.
5
Lift up the top and disconnect the lid lock assembly wire connecter.
6
You can now fully remove the main top…
7
…and set it upside down on a towel or blanket.
8
Release the tension on the lid springs and detach the right-side spring from the main top and hinge bar.
9
Use the phillips-head screwdriver to unthread the screws securing the hinge bar to the lid.
10
Push the hinge bar through the bearing then twist the bar to remove.
11
To install the new hinge bar…
12
Insert it through the hole in the lid and bearing.
13
Twist until the bar sits flush against the inside edge of the lid.
14
Thread the screws to secure.
15
Reattach the shorter end of the lid spring to the hinge bar… and the longer end to the main top.
16
Returning to the appliance…
17
… reinstall the main top by first reconnecting the lid lock assembly wire connecter.
18
Secure the wire in the retaining clip.
19
Now slide the rear of the main top under the rear retaining clips…
20
… then realign the main top and push down to snap it into position.
21
Plug the power cord back in…
22
… and your laundry center should be ready for use.
Applicable Product Model
Related Articles & Videos
07:04
Part Replacement
Frigidaire Electric Laundry Center Dryer Drum Belt Replacement (134503600)
10:24
Part Replacement
Frigidaire Electric Laundry Center Heater Assembly Replacement (137392702)
09:35
Part Replacement
Frigidaire Electric Laundry Center Dryer Drum Bearing Replacement (131777700)
18:36
Part Replacement
Frigidaire Laundry Center Washer Transmission Assembly Replacement (5304517318)
04:37
Part Replacement
Frigidaire Laundry Center Water Inlet Valve Replacement (5304515818)
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com