Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairFrigidaire Laundry Center Air Pressure Hose Replacement (5304515739)
Frigidaire Laundry Center Air Pressure Hose Replacement (5304515739)
Skill Level
Total Parts Cost
$35.64Estimated Savings
$112.5003:43
- Description
This video provides step-by-step repair instructions for replacing the air pressure hose on a Frigidaire electric washer/dryer laundry center (model FFLE3900UW1). The most common reason for replacing this part is if the washer is not filling properly.
This replacement video is applicable to the following brands:
Frigidaire
Don't forget to like and comment on this video and subscribe to our channel!
This replacement video is applicable to the following brands:
Frigidaire
Don't forget to like and comment on this video and subscribe to our channel!
Step By Step Instructions
1
To replace the air pressure hose in your frigidaire laundry center…
2
… you will need a putty knife, a phillips-head screwdriver, and needle-nose pliers.
3
Before you begin the procedure, unplug the power cord.
4
Use the putty knife to release the two retaining clips securing the washer’s main top.
5
Lift up the top and disconnect the lid lock assembly wire connecter.
6
You can now fully remove the main top.
7
Have an assistant help you to lift and support the front of the appliance.
8
Use the phillips-head screwriver to unthread the two screws securing the washer’s front panel to the base.
9
With the screws unthreaded, remove the support…
10
… then push the panel down to fully remove.
11
Use the needle-nose pliers to separate the hose clamp and you can detach the air pressure hose from the pressure sensor.
12
Slide the hose out of the retainer attached to the suspension rod…
13
… and detach the old hose from the air chamber.
14
To install the new air pressure hose…
15
… attach the shorter end to the air chamber port.
16
Feed the longer end through the retainer…
17
… and attach it to the pressure sensor.
18
Secure it with the clamp.
19
Reinstall the front panel…
20
… by aligning the tabs on the panel with the slots in the frame…
21
… then lift the panel up until the top edge aligns with the top of the frame.
22
Support the front of the appliance…
23
…then replace the two lower screws to secure the panel.
24
Remove the support.
25
Reinstall the washer’s main top…
26
… by first reconnecting the lid lock assembly wire connecter.
27
Secure the wire in the retaining clip.
28
Now slide the rear of the main top under the rear retaining clips…
29
… then realign the main top and push down to snap it into position.
30
Plug the power cord back in…
31
… and your laundry center should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the air pressure hose on a Frigidaire electric washer/dryer laundry center (model FFLE3900UW1). The most common reason for replacing this part is if the washer is not filling properly.
This replacement video is applicable to the following brands:
Frigidaire
Don't forget to like and comment on this video and subscribe to our channel!
This replacement video is applicable to the following brands:
Frigidaire
Don't forget to like and comment on this video and subscribe to our channel!
Step-By-Step Instructions
1
To replace the air pressure hose in your frigidaire laundry center…
2
… you will need a putty knife, a phillips-head screwdriver, and needle-nose pliers.
3
Before you begin the procedure, unplug the power cord.
4
Use the putty knife to release the two retaining clips securing the washer’s main top.
5
Lift up the top and disconnect the lid lock assembly wire connecter.
6
You can now fully remove the main top.
7
Have an assistant help you to lift and support the front of the appliance.
8
Use the phillips-head screwriver to unthread the two screws securing the washer’s front panel to the base.
9
With the screws unthreaded, remove the support…
10
… then push the panel down to fully remove.
11
Use the needle-nose pliers to separate the hose clamp and you can detach the air pressure hose from the pressure sensor.
12
Slide the hose out of the retainer attached to the suspension rod…
13
… and detach the old hose from the air chamber.
14
To install the new air pressure hose…
15
… attach the shorter end to the air chamber port.
16
Feed the longer end through the retainer…
17
… and attach it to the pressure sensor.
18
Secure it with the clamp.
19
Reinstall the front panel…
20
… by aligning the tabs on the panel with the slots in the frame…
21
… then lift the panel up until the top edge aligns with the top of the frame.
22
Support the front of the appliance…
23
…then replace the two lower screws to secure the panel.
24
Remove the support.
25
Reinstall the washer’s main top…
26
… by first reconnecting the lid lock assembly wire connecter.
27
Secure the wire in the retaining clip.
28
Now slide the rear of the main top under the rear retaining clips…
29
… then realign the main top and push down to snap it into position.
30
Plug the power cord back in…
31
… and your laundry center should be ready for use.
Applicable Product Model
Parts Needed
Hose
$35.64
Total$0.00
Related Articles & Videos
07:04
Part Replacement
Frigidaire Electric Laundry Center Dryer Drum Belt Replacement (134503600)
10:24
Part Replacement
Frigidaire Electric Laundry Center Heater Assembly Replacement (137392702)
09:35
Part Replacement
Frigidaire Electric Laundry Center Dryer Drum Bearing Replacement (131777700)
18:36
Part Replacement
Frigidaire Laundry Center Washer Transmission Assembly Replacement (5304517318)
04:37
Part Replacement
Frigidaire Laundry Center Water Inlet Valve Replacement (5304515818)
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com