Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairNuTone/Broan Bath Fan (model 765H80L) Heater Cover (part S98003788) Replacement
NuTone/Broan Bath Fan (model 765H80L) Heater Cover (part S98003788) Replacement
Skill Level
Total Parts Cost
$171.93Estimated Savings
$112.5005:24
- Description
This video provides step-by-step instructions for replacing a heater cover (part S98003788) on a NuTone/Broan Bath Fan (model 765H80L). The most common reason for replacing this part is if it is damaged or missing.
Don't forget to like and comment on this video and subscribe to our channel!
Don't forget to like and comment on this video and subscribe to our channel!
Step By Step Instructions
1
To replace the heater cover in this nutone bath fan…
2
… you will need a flat head screwdriver, a ¼ inch nut driver, a philips screwdriver, needle nose pliers, and a 3/8 inch nut driver.
3
Before you begin the procedure, shut off the power supply to the fan.
4
Using a flat head screwdriver, compress the locking tab to release the lens cover from the grille assembly.
5
Unscrew the lightbulb.
6
While securing the grill with your hand, using a 3/8 inch nut driver, loosen and unscrew the acorn nut.
7
Unplug the reflector assembly from the light receptacle and remove the reflector assembly.
8
Unplug the blower and heater receptacle. use needle nose pliers for better handling.
9
Through the access holes, use a philips screwdriver to loosen both pan head screws mounting the heater scroll housing to the bath fan housing.
10
Supporting the heater scroll housing, use a flat head screwdriver to pry tabs apart to release the heater scroll housing, and remove the housing.
11
Using a ¼ inch nut driver, remove the four screws that secure the heater cover and remove the cover.
12
Take the new heater cover out of the packaging.
13
Place the new heater cover on the heater scroll housing and secure the cover with the four hex head screws. tighten with the ¼ inch nut driver.
14
Mount the heater scroll housing into the bath fan housing, setting the heater scroll housing pegs into the bath fan housing grooves. once in place, push up until the heater scroll housing snaps in pla
15
Applying upward pressure to the heater scroll housing, tighten the pan head screws with the philips screwdriver through the access holes, securing the heater scroll housing to the bath fan housing.
16
Now using needle nose pliers, plug in the blower and heater into the blower and heater receptacle.
17
Plug the reflector assembly into the light receptacle.
18
With the grille assembly in hand, feed the reflector assembly through the grille assembly center opening.
19
Support the grille assembly and center it over the bath fan housing.
20
Insert the reflector assembly over the stud located on the exhaust fan housing and feed it through the small hole located in the center of the reflector assembly.
21
While supporting the grille assembly and reflector assembly, screw on the acorn nut and tighten with a 3/8 inch nut driver until the assembly is fully supported by the acorn nut.
22
Screw in the lightbulb.
23
Next, hook one of the tabs of the lens cover into the notch on the grille assembly, and firmly press the opposite side of the lens cover to snap the other tab into place.
24
Turn the power supply back on…
25
… and the bath fan should be ready for use.
Description
This video provides step-by-step instructions for replacing a heater cover (part S98003788) on a NuTone/Broan Bath Fan (model 765H80L). The most common reason for replacing this part is if it is damaged or missing.
Don't forget to like and comment on this video and subscribe to our channel!
Don't forget to like and comment on this video and subscribe to our channel!
Step-By-Step Instructions
1
To replace the heater cover in this nutone bath fan…
2
… you will need a flat head screwdriver, a ¼ inch nut driver, a philips screwdriver, needle nose pliers, and a 3/8 inch nut driver.
3
Before you begin the procedure, shut off the power supply to the fan.
4
Using a flat head screwdriver, compress the locking tab to release the lens cover from the grille assembly.
5
Unscrew the lightbulb.
6
While securing the grill with your hand, using a 3/8 inch nut driver, loosen and unscrew the acorn nut.
7
Unplug the reflector assembly from the light receptacle and remove the reflector assembly.
8
Unplug the blower and heater receptacle. use needle nose pliers for better handling.
9
Through the access holes, use a philips screwdriver to loosen both pan head screws mounting the heater scroll housing to the bath fan housing.
10
Supporting the heater scroll housing, use a flat head screwdriver to pry tabs apart to release the heater scroll housing, and remove the housing.
11
Using a ¼ inch nut driver, remove the four screws that secure the heater cover and remove the cover.
12
Take the new heater cover out of the packaging.
13
Place the new heater cover on the heater scroll housing and secure the cover with the four hex head screws. tighten with the ¼ inch nut driver.
14
Mount the heater scroll housing into the bath fan housing, setting the heater scroll housing pegs into the bath fan housing grooves. once in place, push up until the heater scroll housing snaps in pla
15
Applying upward pressure to the heater scroll housing, tighten the pan head screws with the philips screwdriver through the access holes, securing the heater scroll housing to the bath fan housing.
16
Now using needle nose pliers, plug in the blower and heater into the blower and heater receptacle.
17
Plug the reflector assembly into the light receptacle.
18
With the grille assembly in hand, feed the reflector assembly through the grille assembly center opening.
19
Support the grille assembly and center it over the bath fan housing.
20
Insert the reflector assembly over the stud located on the exhaust fan housing and feed it through the small hole located in the center of the reflector assembly.
21
While supporting the grille assembly and reflector assembly, screw on the acorn nut and tighten with a 3/8 inch nut driver until the assembly is fully supported by the acorn nut.
22
Screw in the lightbulb.
23
Next, hook one of the tabs of the lens cover into the notch on the grille assembly, and firmly press the opposite side of the lens cover to snap the other tab into place.
24
Turn the power supply back on…
25
… and the bath fan should be ready for use.
Applicable Product Model
Parts Needed
Blower Motor
$171.93
Total$0.00
Related Articles & Videos
01:25
Part Replacement
NuTone/Broan Bath Fan (model 765H80L) Light Bulb (part 8009) Replacement
05:33
Part Replacement
NuTone/Broan Bath Fan (model 765H80L) Blower and Heater Receptacle (part S99270489) Replacement
05:56
Part Replacement
NuTone/Broan Bath Fan (model 765H80L) Exhaust Fan (part S1101269) Replacement
05:54
Part Replacement
NuTone/Broan Bath Fan (model 765H80L) Blower Wheel (part S99020276) Replacement
07:01
Part Replacement
NuTone/Broan Bath Fan (model 765H80L) Thermal Fuse (part S97011810) Replacement
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com