Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairNuTone/Broan Bath Fan (model 765H80L) Reflector Assembly (part 1102042) Replacement
NuTone/Broan Bath Fan (model 765H80L) Reflector Assembly (part 1102042) Replacement
Skill Level
Total Parts Cost
$117.38Estimated Savings
$112.5002:21
- Description
This video provides step-by-step instructions for replacing light reflector assembly 1102042 on a NuTone/Broan Bath Fan model 765H80L. The most common reason for replacing this part is if it is damaged.
Don't forget to like and comment on this video and subscribe to our channel!
Don't forget to like and comment on this video and subscribe to our channel!
Step By Step Instructions
1
To replace the reflector assembly in this nutone bath fan…
2
… you will need a flat head screwdriver and a 3/8 inch nut driver.
3
Before you begin the procedure, shut off the power supply to the fan.
4
Using a flat head screwdriver, compress the locking tab to release the lens cover from the grille assembly.
5
Unscrew the lightbulb.
6
While securing the grill with your hand, using a 3/8 inch nut driver, loosen and unscrew the acorn nut.
7
Unplug the reflector assembly from the light receptacle and remove the reflector assembly.
8
Take out the new reflector assembly from the packaging.
9
Plug the new reflector assembly into the light receptacle.
10
With the grille assembly in hand, feed the reflector assembly through the grille assembly center opening.
11
Support the grille assembly and center it over the bath fan housing.
12
Insert the reflector assembly over the stud located on the exhaust fan housing and feed it through the small hole located in the center of the reflector assembly.
13
While supporting the grille assembly and reflector assembly, screw on the acorn nut and tighten with a 3/8 inch nut driver until the assembly is fully supported by the acorn nut.
14
Screw in the lightbulb.
15
Next, hook one of the tabs of the lens cover into the notch on the grille assembly, and firmly press the opposite side of the lens cover to snap the other tab into place.
16
Turn the power supply back on…
17
… and the bath fan should be ready for use.
Description
This video provides step-by-step instructions for replacing light reflector assembly 1102042 on a NuTone/Broan Bath Fan model 765H80L. The most common reason for replacing this part is if it is damaged.
Don't forget to like and comment on this video and subscribe to our channel!
Don't forget to like and comment on this video and subscribe to our channel!
Step-By-Step Instructions
1
To replace the reflector assembly in this nutone bath fan…
2
… you will need a flat head screwdriver and a 3/8 inch nut driver.
3
Before you begin the procedure, shut off the power supply to the fan.
4
Using a flat head screwdriver, compress the locking tab to release the lens cover from the grille assembly.
5
Unscrew the lightbulb.
6
While securing the grill with your hand, using a 3/8 inch nut driver, loosen and unscrew the acorn nut.
7
Unplug the reflector assembly from the light receptacle and remove the reflector assembly.
8
Take out the new reflector assembly from the packaging.
9
Plug the new reflector assembly into the light receptacle.
10
With the grille assembly in hand, feed the reflector assembly through the grille assembly center opening.
11
Support the grille assembly and center it over the bath fan housing.
12
Insert the reflector assembly over the stud located on the exhaust fan housing and feed it through the small hole located in the center of the reflector assembly.
13
While supporting the grille assembly and reflector assembly, screw on the acorn nut and tighten with a 3/8 inch nut driver until the assembly is fully supported by the acorn nut.
14
Screw in the lightbulb.
15
Next, hook one of the tabs of the lens cover into the notch on the grille assembly, and firmly press the opposite side of the lens cover to snap the other tab into place.
16
Turn the power supply back on…
17
… and the bath fan should be ready for use.
Applicable Product Model
Related Articles & Videos
01:25
Part Replacement
NuTone/Broan Bath Fan (model 765H80L) Light Bulb (part 8009) Replacement
05:33
Part Replacement
NuTone/Broan Bath Fan (model 765H80L) Blower and Heater Receptacle (part S99270489) Replacement
05:56
Part Replacement
NuTone/Broan Bath Fan (model 765H80L) Exhaust Fan (part S1101269) Replacement
05:54
Part Replacement
NuTone/Broan Bath Fan (model 765H80L) Blower Wheel (part S99020276) Replacement
07:01
Part Replacement
NuTone/Broan Bath Fan (model 765H80L) Thermal Fuse (part S97011810) Replacement
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com