Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairFrigidaire Induction Range Outer Door Glass Replacement 316355601 
Frigidaire Induction Range Outer Door Glass Replacement 316355601
Skill Level
Total Parts Cost
$146.95Estimated Savings
$112.5005:34
- Description
This video provides step-by-step repair instructions for replacing the outer door glass on a Frigidaire induction range. The most common reason for replacing this part is if it is damaged or dirty.
All of the information for this part replacement video is applicable to the following brands:
Frigidaire
All of the information for this part replacement video is applicable to the following brands:
Frigidaire
Step By Step Instructions
1
Frigidaire Induction Range - GCRI3058AFD
2
Frigidaire Induction Range Outer Door Glass Replacement
3
Tools needed: Phillips-head screwdriver, flat-head screwdriver, putty knife, double-sided tape
4
Shock
5
Before you begin the procedure, unplug the power cord or shut off the power supply.
6
Fully open the oven door, then use the flat-head screwdriver to help rotate the hinge locks forward.
7
Heavy
8
Partially close the door, then lift and pull the door toward you to remove.
9
Set the door handle-side down on a towel or blanket.
10
Use the Phillips-head screwdriver to unthread the two mounting screws securing the door handle.
11
With the screws unthreaded, set the handle aside.
12
Next, unthread the four bottom screws securing the inner door panel assembly to the outer door panel.
13
Heavy
14
Separate the inner panel assembly from the outer panel.
15
Sharp
16
Detach the upper retaining panel.
17
Use the putty knife to help separate the sides of the frame from the double-sided tape.
18
You can now pull the old glass away from the bottom of the frame.
19
To prepare the new outer over door glass for installation, apply two new pieces of double-sided tape to each side of the frame; one near the top, but below where the retaining panel will be, and one near the bottom along the inside edge.
20
Now align the new glass with the bottom of the frame, then push the sides of the frame against the glass to adhere the tape.
21
Reposition the upper retaining panel.
22
Realign the inner door assembly with the outer door panel.
23
Rethread the four bottom screws.
24
Make sure the top edge of the assembly is accessible, then insert the door handle screws.
25
Align the handle and thread the screws into the handle to secure.
26
Reinstall the oven door by inserting the door hinges into the hinge slots at a forty-five degree angle.
27
Lower the door to its fully open position, then rotate the hinge locks back.
28
Plug the power cord back in or restore the power supply and the induction range should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the outer door glass on a Frigidaire induction range. The most common reason for replacing this part is if it is damaged or dirty.
All of the information for this part replacement video is applicable to the following brands:
Frigidaire
All of the information for this part replacement video is applicable to the following brands:
Frigidaire
Step-By-Step Instructions
1
Frigidaire Induction Range - GCRI3058AFD
2
Frigidaire Induction Range Outer Door Glass Replacement
3
Tools needed: Phillips-head screwdriver, flat-head screwdriver, putty knife, double-sided tape
4
Shock
5
Before you begin the procedure, unplug the power cord or shut off the power supply.
6
Fully open the oven door, then use the flat-head screwdriver to help rotate the hinge locks forward.
7
Heavy
8
Partially close the door, then lift and pull the door toward you to remove.
9
Set the door handle-side down on a towel or blanket.
10
Use the Phillips-head screwdriver to unthread the two mounting screws securing the door handle.
11
With the screws unthreaded, set the handle aside.
12
Next, unthread the four bottom screws securing the inner door panel assembly to the outer door panel.
13
Heavy
14
Separate the inner panel assembly from the outer panel.
15
Sharp
16
Detach the upper retaining panel.
17
Use the putty knife to help separate the sides of the frame from the double-sided tape.
18
You can now pull the old glass away from the bottom of the frame.
19
To prepare the new outer over door glass for installation, apply two new pieces of double-sided tape to each side of the frame; one near the top, but below where the retaining panel will be, and one near the bottom along the inside edge.
20
Now align the new glass with the bottom of the frame, then push the sides of the frame against the glass to adhere the tape.
21
Reposition the upper retaining panel.
22
Realign the inner door assembly with the outer door panel.
23
Rethread the four bottom screws.
24
Make sure the top edge of the assembly is accessible, then insert the door handle screws.
25
Align the handle and thread the screws into the handle to secure.
26
Reinstall the oven door by inserting the door hinges into the hinge slots at a forty-five degree angle.
27
Lower the door to its fully open position, then rotate the hinge locks back.
28
Plug the power cord back in or restore the power supply and the induction range should be ready for use.
Applicable Product Model
Related Articles & Videos
06:43
Part Replacement
Frigidaire Induction Range Low-Voltage Wire Harness Replacement 5304522701
04:31
Part Replacement
Frigidaire Induction Range Oven Door Hinge Replacement 5304522696
06:12
Part Replacement
Frigidaire Induction Range Induction Module Replacement 5304527384
06:09
Part Replacement
Frigidaire Induction Range Convection Fan Motor Replacement 316256100
03:37
Part Replacement
Frigidaire Induction Range Main Control Board Replacement 5304524907
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com