Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairGE Dryer Replace Gas Valve Solenoid, Three Terminal #WE4X692
GE Dryer Replace Gas Valve Solenoid, Three Terminal #WE4X692
Skill Level
Total Parts Cost
$41.70Estimated Savings
$112.5002:40
- Description
This video provides step-by-step repair instructions for replacing a three terminal gas valve solenoid on a GE gas dryer. The most common reasons for replacing the gas valve solenoid are when the dryer doesn’t heat, takes too long, or won’t stop.
All of the information for this gas valve solenoid replacement video is applicable to the following brands:
GE, Hotpoint, RCA, Americana
All of the information for this gas valve solenoid replacement video is applicable to the following brands:
GE, Hotpoint, RCA, Americana
Step By Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
Your first step is to remove the screws at the rear of the control panel to release it.
3
Next, open the dryer door and remove the screws inside the door frame which secure the main top.
4
Carefully unhook the control panel tabs from the main top, then lift up the top and remove.
5
Uninstall the screws securing the front panel.
6
Lift the front panel up to remove.
7
Disconnect the wire harness to the solenoid you're replacing.
8
Remove the screws to detach the mounting bracket and pull the old solenoid off of the gas valve.
9
Install the new solenoid by positioning it on the gas valve, align the bracket, and secure it with the screws.
10
Connect the wire harness to the new solenoid.
11
Reposition the front panel by first aligning the tabs in the base with the slots in the panel.
12
Now lift up the drum and snap the front panel into place.
13
Secure the screws.
14
Replace the main top by aligning the slots in the top with the tabs on the frame, then reinstall the screws in the doorframe to secure.
15
Reposition the control panel by inserting the tabs into the slots at the back of the main top.
16
Replace the screws in the back to secure.
17
You're now ready to plug the power cord back in and confirm that the appliance is functioning properly.
Description
This video provides step-by-step repair instructions for replacing a three terminal gas valve solenoid on a GE gas dryer. The most common reasons for replacing the gas valve solenoid are when the dryer doesn’t heat, takes too long, or won’t stop.
All of the information for this gas valve solenoid replacement video is applicable to the following brands:
GE, Hotpoint, RCA, Americana
All of the information for this gas valve solenoid replacement video is applicable to the following brands:
GE, Hotpoint, RCA, Americana
Step-By-Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
Your first step is to remove the screws at the rear of the control panel to release it.
3
Next, open the dryer door and remove the screws inside the door frame which secure the main top.
4
Carefully unhook the control panel tabs from the main top, then lift up the top and remove.
5
Uninstall the screws securing the front panel.
6
Lift the front panel up to remove.
7
Disconnect the wire harness to the solenoid you're replacing.
8
Remove the screws to detach the mounting bracket and pull the old solenoid off of the gas valve.
9
Install the new solenoid by positioning it on the gas valve, align the bracket, and secure it with the screws.
10
Connect the wire harness to the new solenoid.
11
Reposition the front panel by first aligning the tabs in the base with the slots in the panel.
12
Now lift up the drum and snap the front panel into place.
13
Secure the screws.
14
Replace the main top by aligning the slots in the top with the tabs on the frame, then reinstall the screws in the doorframe to secure.
15
Reposition the control panel by inserting the tabs into the slots at the back of the main top.
16
Replace the screws in the back to secure.
17
You're now ready to plug the power cord back in and confirm that the appliance is functioning properly.
Applicable Product Model
Parts Needed
Gas Valve Solenoid
$41.70
Recommended Tools and Accessories
Gas Valve Solenoid
$37.10
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com