Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairFrigidaire Range Vent Hood Selector Switch Assembly Replacement 5304482236 
Frigidaire Range Vent Hood Selector Switch Assembly Replacement 5304482236
Skill Level
Total Parts Cost
$128.47Estimated Savings
$112.5004:51
- Description
This video provides step-by-step repair instructions for replacing the selector switch assembly on a Frigidaire Range Vent Hood (model FHWC3660LSA). The most common reason for replacing this part is if none of the selector buttons work.
All of the information for this part replacement video is applicable to the following brands:
Frigidaire
All of the information for this part replacement video is applicable to the following brands:
Frigidaire
Step By Step Instructions
1
Frigidaire Range Vent Hood - FHWC3660LSA
2
Frigidaire Range Vent Hood Selector Switch Assembly Replacement
3
Tools needed: Phillips-head screwdriver, small flat-head screwdriver
4
Shock
5
Before you begin the procedure, be sure to turn off the power supply to the hood.
6
Pull the right-side lever down to release the grease filter.
7
Use the Phillips-head screwdriver to unthread the four screws to release the terminal block cover.
8
Cut the zip-ties securing the selector switch assembly wire harness.
9
Next, unthread the two mounting screws securing the assembly to the front panel.
10
Pull the assembly away from the panel.
11
Note the orientation of the selector switch assembly wires attached to the terminal blocks, then use the small flat-head screwdriver to loosen the screws to release the wires.
12
To install the new selector switch assembly, insert the wires into the appropriate terminals on the terminal blocks and tighten the screws to secure.
13
Position the selector switch assembly in the front panel and thread the two mounting screws.
14
Use new zip-ties to secure the wire harness.
15
Reposition the terminals blocks in the housing and align the cover.
16
Thread the screws to secure.
17
Reinstall the grease filter by aligning the left side tabs with the slots in the hood, then pull the lever to align the right side.
18
Turn the power supply back on and the range vent hood should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the selector switch assembly on a Frigidaire Range Vent Hood (model FHWC3660LSA). The most common reason for replacing this part is if none of the selector buttons work.
All of the information for this part replacement video is applicable to the following brands:
Frigidaire
All of the information for this part replacement video is applicable to the following brands:
Frigidaire
Step-By-Step Instructions
1
Frigidaire Range Vent Hood - FHWC3660LSA
2
Frigidaire Range Vent Hood Selector Switch Assembly Replacement
3
Tools needed: Phillips-head screwdriver, small flat-head screwdriver
4
Shock
5
Before you begin the procedure, be sure to turn off the power supply to the hood.
6
Pull the right-side lever down to release the grease filter.
7
Use the Phillips-head screwdriver to unthread the four screws to release the terminal block cover.
8
Cut the zip-ties securing the selector switch assembly wire harness.
9
Next, unthread the two mounting screws securing the assembly to the front panel.
10
Pull the assembly away from the panel.
11
Note the orientation of the selector switch assembly wires attached to the terminal blocks, then use the small flat-head screwdriver to loosen the screws to release the wires.
12
To install the new selector switch assembly, insert the wires into the appropriate terminals on the terminal blocks and tighten the screws to secure.
13
Position the selector switch assembly in the front panel and thread the two mounting screws.
14
Use new zip-ties to secure the wire harness.
15
Reposition the terminals blocks in the housing and align the cover.
16
Thread the screws to secure.
17
Reinstall the grease filter by aligning the left side tabs with the slots in the hood, then pull the lever to align the right side.
18
Turn the power supply back on and the range vent hood should be ready for use.
Applicable Product Model
Parts Needed
Push Button Switch
$128.47
Recommended Tools and Accessories
Cooktop Cleaner
$29.50
Total$0.00
Related Articles & Videos
05:29
Part Replacement
Frigidaire Range Vent Hood Recirculation Kit Installation 5304482271
02:42
Part Replacement
Frigidaire Range Vent Hood Upper Chimney Extension Replacement 5304482269
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com