Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairLG Refrigerator Temperature Sensor #6500JB2002X
LG Refrigerator Temperature Sensor #6500JB2002X
Skill Level
Total Parts Cost
$22.11Estimated Savings
$112.5007:22
- Description
This video provides step-by-step repair instructions for replacing the temperature sensor in an LG Refrigerator.
All of the information for this temperature sensor replacement video is applicable to the following brands:
LG
Tools needed: Phillips Screwdriver/Drill Driver, Flathead Screwdriver
All of the information for this temperature sensor replacement video is applicable to the following brands:
LG
Tools needed: Phillips Screwdriver/Drill Driver, Flathead Screwdriver
Step By Step Instructions
1
To replace the temperature sensor in this lg refrigerator…
2
You will need a flathead screwdriver and a phillips screwdriver or drill driver with a number 2 phiillips bit.
3
Be sure to unplug the appliance before working with any electrical components.
4
Fully extend out the top freezer tray by lifting the front. then pull out the ice container.
5
Next, pull and lift out the freezer tray.
6
Lift the bottom freezer drawer out from the back.
7
Loosen and remove the two phillips screws securing the freezer door and lift it up and out to remove it.
8
Use the screwdriver to depress the tab on the drawer gear and pull up to detatch the bar from the slide rail.
9
Remove the two screws on the ice maker
10
Use the flathead screwdriver to release the tabs and pull it down, sliding it forward at the same time.
11
Unplug the wire harness and remove the ice maker.
12
Unsnap the evaporator cover
13
Unplug the temperature sensor and the evaporator fan.
14
Peel off the foam insulator and use the flathead screwdriver to pry out the temperature sensor.
15
To install the new temperature sensor…
16
Snap the sensor into the evaporator cover and set the insulation in position.
17
Plug in the evaporator and temperature sensor
18
Position and snap the evaporator cover into place.
19
Plug in the wire harness for the ice maker.
20
Slide the back of the ice maker into place and push up to snap in the tabs.
21
Thread and tighten the two screws to secure the ice maker.
22
Insert the bar into the set gear and snap the gear on the other end into its slot within the slide rail. this can be difficult to align.
23
Set the freezer door by hooking the connector rails to the sliders.
24
Screw in the two phillips head screws to secure the door.
25
Place the drawer back inside the freezer.
26
Slide the tray back into the guide rails.
27
Then insert the ice container.
28
Plug in the appliance.
29
…. and the lg refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the temperature sensor in an LG Refrigerator.
All of the information for this temperature sensor replacement video is applicable to the following brands:
LG
Tools needed: Phillips Screwdriver/Drill Driver, Flathead Screwdriver
All of the information for this temperature sensor replacement video is applicable to the following brands:
LG
Tools needed: Phillips Screwdriver/Drill Driver, Flathead Screwdriver
Step-By-Step Instructions
1
To replace the temperature sensor in this lg refrigerator…
2
You will need a flathead screwdriver and a phillips screwdriver or drill driver with a number 2 phiillips bit.
3
Be sure to unplug the appliance before working with any electrical components.
4
Fully extend out the top freezer tray by lifting the front. then pull out the ice container.
5
Next, pull and lift out the freezer tray.
6
Lift the bottom freezer drawer out from the back.
7
Loosen and remove the two phillips screws securing the freezer door and lift it up and out to remove it.
8
Use the screwdriver to depress the tab on the drawer gear and pull up to detatch the bar from the slide rail.
9
Remove the two screws on the ice maker
10
Use the flathead screwdriver to release the tabs and pull it down, sliding it forward at the same time.
11
Unplug the wire harness and remove the ice maker.
12
Unsnap the evaporator cover
13
Unplug the temperature sensor and the evaporator fan.
14
Peel off the foam insulator and use the flathead screwdriver to pry out the temperature sensor.
15
To install the new temperature sensor…
16
Snap the sensor into the evaporator cover and set the insulation in position.
17
Plug in the evaporator and temperature sensor
18
Position and snap the evaporator cover into place.
19
Plug in the wire harness for the ice maker.
20
Slide the back of the ice maker into place and push up to snap in the tabs.
21
Thread and tighten the two screws to secure the ice maker.
22
Insert the bar into the set gear and snap the gear on the other end into its slot within the slide rail. this can be difficult to align.
23
Set the freezer door by hooking the connector rails to the sliders.
24
Screw in the two phillips head screws to secure the door.
25
Place the drawer back inside the freezer.
26
Slide the tray back into the guide rails.
27
Then insert the ice container.
28
Plug in the appliance.
29
…. and the lg refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Temperature Sensor
$22.11
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com