DescriptionThis video provides step-by-step instructions for replacing the front grille assembly on a Frigidaire Air Conditioner. The most common reason for replacing this part is if it is damaged or missing.
All of the information in this video is applicable to the following brands: Frigidaire
Step-By-Step Instructions1
To replace the front grille assembly on this frigidaire air conditioner…
2
… you will need a #1 phillips-head screwdriver, a #2 phillips-head screwdriver, and a putty knife.
3
Before you begin, unplug the unit’s power cord.
4
Your first step is to pull the air filter out.
5
Now use the #2 phillips-head screwdriver to unthread the two screws securing the grille assembly.
6
With the screws unthreaded, use the putty knife to help pry the grille assembly off.
7
Release the control panel wiring from the retainers.
8
Next, use the #1 phillips-head screwdriver to unthread the two screws securing the control panel.
9
Pull back the retaining clips to release the panel.
10
To prepare the new front grille assembly for installation…
11
… transfer the control panel overlay from the old grille to the new one.
12
Now align the control panel under the retaining clips.
13
Thread the two screws to secure.
14
Secure the wiring in the retainers.
15
Align the top tabs of the grille assembly with the slots in the top edge of the unit and snap the assembly into position.
16
Thread the two mounting screws.
17
Keeping the upper lip facing outward, insert the air filter into the front grille slot.
18
Plug the power cord back in…
19
… and the air conditioner should be ready for use.