DescriptionThis video provides step-by-step instructions for replacing the air louver lever on a Frigidaire Air Conditioner. The most common reason for replacing this part is if it is damaged or missing.
All of the information in this video is applicable to the following brands: Frigidaire
Step-By-Step Instructions1
To replace an air louver lever on this frigidaire air conditioner…
2
… you will need a flat-head screwdriver.
3
With the unit turned off, insert the flat-head screwdriver to depress the side of the horizontal louver assembly so you can pull it out.
4
Now use the screwdriver to help release the four vertical louver fins attached to the lever you’re replacing.
5
If still intact, unhook the old lever.
6
To install the new air louver lever…
7
… hook the actuator tab on the notch in the horizontal louver.
8
Snap the four vertical louver fins into place on the lever and the horizontal louver.
9
With the fins in place, align the side notches in the louver with the mounting posts on the unit and snap the assembly into position.
10
The air conditioner should now be ready for use.