Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairGE Dishwasher Lower Rack Roller Assembly Replacement #WD28X27241
GE Dishwasher Lower Rack Roller Assembly Replacement #WD28X27241
Skill Level
Total Parts Cost
$50.25Estimated Savings
$112.5001:59
- Description
This video provides step-by-step instructions for replacing the lower rack roller assembly in GE dishwashers. The most common reason for replacing the lower rack roller assembly is if it's cracked or broken.
*Note*
Part has been redesigned and is interchangeable with both the left and right side.
All of the information in this check valve video is applicable to the following brands: GE
*Note*
Part has been redesigned and is interchangeable with both the left and right side.
All of the information in this check valve video is applicable to the following brands: GE
Step By Step Instructions
1
To replace the lower rack roller assembly in your GE dishwasher…
2
You will need a flathead screwdriver
3
Roll the lower rack assembly out of the dishwasher and take out the silverware basket.
4
Remove the lower rack assembly.
5
Set the rack on a flat surface.
6
Using the flathead unclip the roller assembly from the lower rack.
7
To install the new roller assembly…
8
Attach the rollers supplied by the kit onto the clips of the universal bracket.
9
Slide and snap the new assembly onto the rack.
10
Set the rack assembly on the dishwasher and place in the silverware basket.
11
Slide the lower rack assembly back into the dishwasher.
12
…and your dishwasher should be ready for use.
13
Please note the lower rack roller assembly is being replaced with a universal assembly. this part has been redesigned and is interchangable with both the left and the right side.
14
To replace the lower rack roller assembly in your GE dishwasher…
15
Roll the lower rack assembly out of the dishwasher and take out the silverware basket.
16
Remove the lower rack assembly.
17
Set the rack on a flat surface.
18
Pop the rear and middle front of the roller cover off the roller carrier tabs.
19
Pull off the roller wheels.
20
Unmount the roller carrier from the basket.
21
To install the new roller assembly…
22
Snap the rollers supplied by the kit onto the clips of the universal bracket.
23
Slide and snap the new assembly onto the rack.
24
Set the rack assembly on the dishwasher and place in the silverware basket.
25
Slide the lower rack assembly back into the dishwasher.
26
…and your dishwasher should be ready for use.
Description
This video provides step-by-step instructions for replacing the lower rack roller assembly in GE dishwashers. The most common reason for replacing the lower rack roller assembly is if it's cracked or broken.
*Note*
Part has been redesigned and is interchangeable with both the left and right side.
All of the information in this check valve video is applicable to the following brands: GE
*Note*
Part has been redesigned and is interchangeable with both the left and right side.
All of the information in this check valve video is applicable to the following brands: GE
Step-By-Step Instructions
1
To replace the lower rack roller assembly in your GE dishwasher…
2
You will need a flathead screwdriver
3
Roll the lower rack assembly out of the dishwasher and take out the silverware basket.
4
Remove the lower rack assembly.
5
Set the rack on a flat surface.
6
Using the flathead unclip the roller assembly from the lower rack.
7
To install the new roller assembly…
8
Attach the rollers supplied by the kit onto the clips of the universal bracket.
9
Slide and snap the new assembly onto the rack.
10
Set the rack assembly on the dishwasher and place in the silverware basket.
11
Slide the lower rack assembly back into the dishwasher.
12
…and your dishwasher should be ready for use.
13
Please note the lower rack roller assembly is being replaced with a universal assembly. this part has been redesigned and is interchangable with both the left and the right side.
14
To replace the lower rack roller assembly in your GE dishwasher…
15
Roll the lower rack assembly out of the dishwasher and take out the silverware basket.
16
Remove the lower rack assembly.
17
Set the rack on a flat surface.
18
Pop the rear and middle front of the roller cover off the roller carrier tabs.
19
Pull off the roller wheels.
20
Unmount the roller carrier from the basket.
21
To install the new roller assembly…
22
Snap the rollers supplied by the kit onto the clips of the universal bracket.
23
Slide and snap the new assembly onto the rack.
24
Set the rack assembly on the dishwasher and place in the silverware basket.
25
Slide the lower rack assembly back into the dishwasher.
26
…and your dishwasher should be ready for use.
Applicable Product Model
Related Articles & Videos
01:37
Part Replacement
GE Dishwasher Lower Rack Roller Assembly Replacement (Interchangeable Design) #WD28X27241
01:28
Part Replacement
GE Dishwasher Lower Left Rack Roller Cover Replacement #WD28X27241
01:47
Part Replacement
GE Dishwasher Lower Right Dishrack Roller Carrier Replacement #WD28X27241
01:50
Part Replacement
GE Dishwasher Lower Left Dishrack Roller Carrier Replacement #WD12X22656
01:25
Part Replacement
GE Dishwasher Lower Right Rack Roller Cover Replacement #WD28X27241
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com