DescriptionThis video provides step-by-step repair instructions for replacing the rear lower shelf gasket on a GE Refrigerator (Model GSE25GSHPCSS). The most common reason for replacing this part is if it is damaged or missing.
All of the information for this video is applicable to the following brands: GE
Step-By-Step Instructions1
To replace the rear lower shelf gasket in this GE refrigerator…
2
… you will need a flat-head screwdriver.
3
… fully remove both the middle drawer and the lower drawer.
4
Next, remove the glass shelf from the cover.
5
You can now lift the cover up and forward to remove.
6
Use the flat-head screwdriver to help detach the old rear gasket if still intact.
7
To install the new rear gasket…
8
… align it on the tabs of the cover.
9
Now align the cover’s rear notches over the rear liner support posts and lower the cover onto the front posts.
10
Insert the front edge of the glass shelf into the cover first then lower the rear edge.
11
Replace the lower drawer as well as the middle drawer…
12
… and the refrigerator should be ready for use.