Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairGE Refrigerator Dispenser Actuator Spring Replacement WR02X10585 
GE Refrigerator Dispenser Actuator Spring Replacement WR02X10585
Skill Level
Total Parts Cost
$11.43Estimated Savings
$112.5003:30
- Description
This video provides step-by-step repair instructions for replacing the dispenser actuator spring on a GE Refrigerator (Model GSE25GSHPCSS). The most common reason for replacing this part is if it is damaged or missing.
All of the information for this video is applicable to the following brands: GE
All of the information for this video is applicable to the following brands: GE
Step By Step Instructions
1
To replace the water and ice dispenser actuator spring in this GE refrigerator…
2
… you will need a phillips-head screwdriver and a narrow small flat-head screwdriver.
3
Before you begin the procedure, unplug the appliance’s power cord.
4
You can insert a narrow small flat-head screwdriver or comparable-sized tool into the holes on the bottom of the funnel and paddle assembly to help detach the display control.
5
Disconnect the three wire harness connecters to fully release the control.
6
Using the phillips-head screwdriver, unthread the four mounting screws to release the funnel and paddle assembly.
7
Next, unthread the two screws securing the dispenser actuator.
8
If still intact, you can remove the old spring.
9
To install the new dispenser actuator spring…
10
… align it on the actuator.
11
Apply tension to the spring as you insert the actuator lever into the slot in the solenoid and position the actuator in the slots in the dispenser housing.
12
Align the retaining brackets then thread the two mounting screws to secure.
13
Feed the wires through the funnel and paddle assembly as you position the assembly in the housing.
14
Secure the assembly with the four screws.
15
Reconnect the three wire harness connecters to the appropriate terminals on the back of the display control.
16
Reposition the control by aligning the top edge first, then snap the bottom edge into place.
17
Plug the appliance’s power cord back in…
18
… and the refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the dispenser actuator spring on a GE Refrigerator (Model GSE25GSHPCSS). The most common reason for replacing this part is if it is damaged or missing.
All of the information for this video is applicable to the following brands: GE
All of the information for this video is applicable to the following brands: GE
Step-By-Step Instructions
1
To replace the water and ice dispenser actuator spring in this GE refrigerator…
2
… you will need a phillips-head screwdriver and a narrow small flat-head screwdriver.
3
Before you begin the procedure, unplug the appliance’s power cord.
4
You can insert a narrow small flat-head screwdriver or comparable-sized tool into the holes on the bottom of the funnel and paddle assembly to help detach the display control.
5
Disconnect the three wire harness connecters to fully release the control.
6
Using the phillips-head screwdriver, unthread the four mounting screws to release the funnel and paddle assembly.
7
Next, unthread the two screws securing the dispenser actuator.
8
If still intact, you can remove the old spring.
9
To install the new dispenser actuator spring…
10
… align it on the actuator.
11
Apply tension to the spring as you insert the actuator lever into the slot in the solenoid and position the actuator in the slots in the dispenser housing.
12
Align the retaining brackets then thread the two mounting screws to secure.
13
Feed the wires through the funnel and paddle assembly as you position the assembly in the housing.
14
Secure the assembly with the four screws.
15
Reconnect the three wire harness connecters to the appropriate terminals on the back of the display control.
16
Reposition the control by aligning the top edge first, then snap the bottom edge into place.
17
Plug the appliance’s power cord back in…
18
… and the refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Spring
$11.43
Total$0.00
Related Articles & Videos
01:40
Part Replacement
GE Refrigerator Dispenser Display Control Assembly Replacement WR55X34887
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com