Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairGE Dishwasher Dishrack Roller Assembly Replacement GDF510PSMSS
GE Dishwasher Dishrack Roller Assembly Replacement GDF510PSMSS
Skill Level
Total Parts Cost
$18.33Estimated Savings
$112.5002:39
- Description
This video provides step-by-step repair instructions for replacing the dishrack roller assembly in a GE Dishwasher (Model GDF510PSMSS). The most common reason for replacing this part is if it is damaged or missing.
All of the information for this video is applicable to the following brands: GE
All of the information for this video is applicable to the following brands: GE
Step By Step Instructions
1
To replace the dishrack roller assembly in your GE dishwasher…
2
You will need a jeweller’s flathead screwdriver
3
Extend the upper
4
Gently pry the tabs open to release the end caps on the slide rails.
5
Now you can remove the rack.
6
… and set it on a flat surface.
7
Use the screwdriver to compress the tab on the bracket clip while pulling it up...
8
…then push it forward to unhook it. save the clip for the new dishrack roller assembly.
9
Now remove the assembly from the rack.
10
To install the new dishrack roller assembly…
11
Insert and align the assembly onto the dishrack.
12
Insert and snap the clip into the dishrack roller assembly.
13
Insert the rails between the rollers to set the rack.
14
Snap the end caps back onto the slide rails.
15
And the dishwasher should be ready for use.
16
…and your dishwasher should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the dishrack roller assembly in a GE Dishwasher (Model GDF510PSMSS). The most common reason for replacing this part is if it is damaged or missing.
All of the information for this video is applicable to the following brands: GE
All of the information for this video is applicable to the following brands: GE
Step-By-Step Instructions
1
To replace the dishrack roller assembly in your GE dishwasher…
2
You will need a jeweller’s flathead screwdriver
3
Extend the upper
4
Gently pry the tabs open to release the end caps on the slide rails.
5
Now you can remove the rack.
6
… and set it on a flat surface.
7
Use the screwdriver to compress the tab on the bracket clip while pulling it up...
8
…then push it forward to unhook it. save the clip for the new dishrack roller assembly.
9
Now remove the assembly from the rack.
10
To install the new dishrack roller assembly…
11
Insert and align the assembly onto the dishrack.
12
Insert and snap the clip into the dishrack roller assembly.
13
Insert the rails between the rollers to set the rack.
14
Snap the end caps back onto the slide rails.
15
And the dishwasher should be ready for use.
16
…and your dishwasher should be ready for use.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com