Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairGE Dishwasher Upper Rack Assembly Replacement GDF510PSMSS
GE Dishwasher Upper Rack Assembly Replacement GDF510PSMSS
Skill Level
Total Parts Cost
$83.16Estimated Savings
$112.5002:25
- Description
This video provides step-by-step repair instructions for replacing the upper rack assembly in a GE Dishwasher (Model GDF510PSMSS). The most common reason for replacing this part is if it is damaged or missing.
All of the information for this video is applicable to the following brands: GE
All of the information for this video is applicable to the following brands: GE
Step By Step Instructions
1
To replace the upper rack assembly in your GE dishwasher, extend the upper rack assembly.
2
Gently pry the tabs open to release the end caps on the slide rails.
3
Now you can remove the rack from the slide rails and set it on a flat surface.
4
Note the orientation of the hooks on the rack.
5
Then, gently pry up and push the tab to release the supply tube from the rack.
6
To install the new rack assembly, center the spray arm assembly under the rack.
7
Then, hook and snap the spray arm into place.
8
Insert the sliders between the rollers to set the rack.
9
Snap the end caps back onto the slide rails, and the dishwasher should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the upper rack assembly in a GE Dishwasher (Model GDF510PSMSS). The most common reason for replacing this part is if it is damaged or missing.
All of the information for this video is applicable to the following brands: GE
All of the information for this video is applicable to the following brands: GE
Step-By-Step Instructions
1
To replace the upper rack assembly in your GE dishwasher, extend the upper rack assembly.
2
Gently pry the tabs open to release the end caps on the slide rails.
3
Now you can remove the rack from the slide rails and set it on a flat surface.
4
Note the orientation of the hooks on the rack.
5
Then, gently pry up and push the tab to release the supply tube from the rack.
6
To install the new rack assembly, center the spray arm assembly under the rack.
7
Then, hook and snap the spray arm into place.
8
Insert the sliders between the rollers to set the rack.
9
Snap the end caps back onto the slide rails, and the dishwasher should be ready for use.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com