Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairGE Dishwasher Twist Lock Heater Clip Replacement GDF510PSMSS
GE Dishwasher Twist Lock Heater Clip Replacement GDF510PSMSS
Skill Level
Total Parts Cost
$7.18Estimated Savings
$112.5001:47
- Description
This video provides step-by-step repair instructions for replacing the twist lock heater clip in a GE Dishwasher (Model GDF510PSMSS). The most common reason for replacing this part is if it is damaged or missing.
All of the information for this video is applicable to the following brands: GE
All of the information for this video is applicable to the following brands: GE
Step By Step Instructions
1
To replace the twist lock heater clip in your GE dishwasher…
2
You will need a 1/4" drill driver or nut driver.
3
Before attempting this repair, be sure the dishwasher is fully cooled after its run cycle.
4
Remove the lower dishrack.
5
Unthread the 1/4” screw on the heater clip and twist the clip clockwise to remove it from the tub.
6
To install the new heater clip…
7
Fit the clip over the plastic mount and twist counter-clockwise to lock in place…
8
… then rethread the 1/4" screw to secure it.
9
Set the lower rack assembly back into the dishwasher.
10
And the dishwasher should be ready for use.
11
…and your dishwasher should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the twist lock heater clip in a GE Dishwasher (Model GDF510PSMSS). The most common reason for replacing this part is if it is damaged or missing.
All of the information for this video is applicable to the following brands: GE
All of the information for this video is applicable to the following brands: GE
Step-By-Step Instructions
1
To replace the twist lock heater clip in your GE dishwasher…
2
You will need a 1/4" drill driver or nut driver.
3
Before attempting this repair, be sure the dishwasher is fully cooled after its run cycle.
4
Remove the lower dishrack.
5
Unthread the 1/4” screw on the heater clip and twist the clip clockwise to remove it from the tub.
6
To install the new heater clip…
7
Fit the clip over the plastic mount and twist counter-clockwise to lock in place…
8
… then rethread the 1/4" screw to secure it.
9
Set the lower rack assembly back into the dishwasher.
10
And the dishwasher should be ready for use.
11
…and your dishwasher should be ready for use.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com