Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairGE Dishwasher Water Guide Replacement GDF510PSMSS
GE Dishwasher Water Guide Replacement GDF510PSMSS
Skill Level
Total Parts Cost
$13.93Estimated Savings
$112.5002:56
- Description
This video provides step-by-step repair instructions for replacing the water guide in a GE Dishwasher (Model GDF510PSMSS). The most common reason for replacing this part is if it is damaged or missing.
All of the information for this video is applicable to the following brands: GE
All of the information for this video is applicable to the following brands: GE
Step By Step Instructions
1
To replace the water guide in your GE dishwasher…
2
You will need a 1/4” drill driver or nut driver.
3
Remove the lower dishrack.
4
Extend the upper rack assembly from the dishwasher.
5
Gently pry the tabs open to release the end caps on the slide rails.
6
Now you can remove the rack.
7
Unthread the two 1/4” screws from the docking port.
8
Remove the water guide from the diverter valve.
9
Unclip the docking port from the guide.
10
To install the new water guide…
11
Snap the docking port onto the guide.
12
Insert the water guide back into the diverter valve.
13
Align the docking port and rethread the two screws.
14
Set the lower rack assembly back into the dishwasher.
15
Insert the rails between the rollers to set the rack.
16
Snap the end caps back onto the slide rails.
17
…and your dishwasher should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the water guide in a GE Dishwasher (Model GDF510PSMSS). The most common reason for replacing this part is if it is damaged or missing.
All of the information for this video is applicable to the following brands: GE
All of the information for this video is applicable to the following brands: GE
Step-By-Step Instructions
1
To replace the water guide in your GE dishwasher…
2
You will need a 1/4” drill driver or nut driver.
3
Remove the lower dishrack.
4
Extend the upper rack assembly from the dishwasher.
5
Gently pry the tabs open to release the end caps on the slide rails.
6
Now you can remove the rack.
7
Unthread the two 1/4” screws from the docking port.
8
Remove the water guide from the diverter valve.
9
Unclip the docking port from the guide.
10
To install the new water guide…
11
Snap the docking port onto the guide.
12
Insert the water guide back into the diverter valve.
13
Align the docking port and rethread the two screws.
14
Set the lower rack assembly back into the dishwasher.
15
Insert the rails between the rollers to set the rack.
16
Snap the end caps back onto the slide rails.
17
…and your dishwasher should be ready for use.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com