Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairGE Dishwasher Jumper Harness Replacement GDF510PSMSS
GE Dishwasher Jumper Harness Replacement GDF510PSMSS
Skill Level
Total Parts Cost
$10.71Estimated Savings
$112.5004:20
- Description
This video provides step-by-step repair instructions for replacing the jumper harness in a GE Dishwasher (Model GDF510PSMSS). The most common reason for replacing this part is if it is damaged or missing.
All of the information for this video is applicable to the following brands: GE
All of the information for this video is applicable to the following brands: GE
Step By Step Instructions
1
To replace the jumper harness in your GE dishwasher…
2
You will need a 1/4” drill driver or nut driver, a 5/16” nut driver bit, and a flathead screwdriver.
3
Before you attempt this, be sure to turn off the power to the appliance…
4
Using the drill driver, unthread the two screws securing the toe kick and set it aside.
5
Next, use a 5/16 drill driver to unthread the screw to release the junction box cover.
6
Note the orientation of the power wires…then untwist the wire nuts to disconnect the wires.
7
Use the flathead screwdriver to unthread the strain relief nut…
8
…and detach the strain relief and power wires from the junction box.
9
Unplug the harness from the machine control board.
10
Unthread the ground screw.
11
To install the new jumper harness…
12
Rethread the ground screw to the junction plate.
13
Plug in the wire harness.
14
Fully position the wires and strain relief nut in the junction box…
15
…then thread and tighten the strain relief nut.
16
Join the black wires together, the white wires together, and green wires together. secure them with the wire nuts.
17
With the wires positioned inside the junction box, realign the cover…
18
…and rethread the screw to secure.
19
Set the toe kick into place and secure with the two screws.
20
Turn on the power…
21
…and your dishwasher should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the jumper harness in a GE Dishwasher (Model GDF510PSMSS). The most common reason for replacing this part is if it is damaged or missing.
All of the information for this video is applicable to the following brands: GE
All of the information for this video is applicable to the following brands: GE
Step-By-Step Instructions
1
To replace the jumper harness in your GE dishwasher…
2
You will need a 1/4” drill driver or nut driver, a 5/16” nut driver bit, and a flathead screwdriver.
3
Before you attempt this, be sure to turn off the power to the appliance…
4
Using the drill driver, unthread the two screws securing the toe kick and set it aside.
5
Next, use a 5/16 drill driver to unthread the screw to release the junction box cover.
6
Note the orientation of the power wires…then untwist the wire nuts to disconnect the wires.
7
Use the flathead screwdriver to unthread the strain relief nut…
8
…and detach the strain relief and power wires from the junction box.
9
Unplug the harness from the machine control board.
10
Unthread the ground screw.
11
To install the new jumper harness…
12
Rethread the ground screw to the junction plate.
13
Plug in the wire harness.
14
Fully position the wires and strain relief nut in the junction box…
15
…then thread and tighten the strain relief nut.
16
Join the black wires together, the white wires together, and green wires together. secure them with the wire nuts.
17
With the wires positioned inside the junction box, realign the cover…
18
…and rethread the screw to secure.
19
Set the toe kick into place and secure with the two screws.
20
Turn on the power…
21
…and your dishwasher should be ready for use.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com