Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairGE Refrigerator Dispenser Funnel Replacement WR17X21781 
GE Refrigerator Dispenser Funnel Replacement WR17X21781
Skill Level
Total Parts Cost
$29.47Estimated Savings
$112.5003:03
- Description
This video provides step-by-step repair instructions for replacing the dispenser funnel on a GE Refrigerator (Model GSE25GSHPCSS). The most common reason for replacing this part is if it is damaged or missing.
All of the information for this video is applicable to the following brands: GE
All of the information for this video is applicable to the following brands: GE
Step By Step Instructions
1
To replace the water and ice dispenser funnel in this GE refrigerator…
2
… you will need a phillips-head screwdriver and a narrow small flat-head screwdriver.
3
Before you begin the procedure, unplug the appliance’s power cord.
4
You can insert a narrow small flat-head screwdriver or comparable-sized tool into the holes on the bottom of the funnel and paddle assembly to help detach the display control.
5
Disconnect the three wire harness connecters to fully release the control.
6
Using the phillips-head screwdriver, unthread the four mounting screws to release the funnel and paddle assembly.
7
Detach the paddle.
8
You can now slide out the old funnel.
9
To install the new dispenser funnel…
10
… align it in the housing grooves and snap it into place.
11
Confirm the long end of the spring is inserted into the notch on the rear of the paddle…
12
… then hold the spring in place as you snap the paddle into place in the funnel notches.
13
Feed the wires through the funnel and paddle assembly as you position the assembly in the housing.
14
Secure the assembly with the four screws.
15
Reconnect the three wire harness connecters to the appropriate terminals on the back of the display control.
16
Reposition the control by aligning the top edge first, then snap the bottom edge into place.
17
Plug the appliance’s power cord back in…
18
… and the refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the dispenser funnel on a GE Refrigerator (Model GSE25GSHPCSS). The most common reason for replacing this part is if it is damaged or missing.
All of the information for this video is applicable to the following brands: GE
All of the information for this video is applicable to the following brands: GE
Step-By-Step Instructions
1
To replace the water and ice dispenser funnel in this GE refrigerator…
2
… you will need a phillips-head screwdriver and a narrow small flat-head screwdriver.
3
Before you begin the procedure, unplug the appliance’s power cord.
4
You can insert a narrow small flat-head screwdriver or comparable-sized tool into the holes on the bottom of the funnel and paddle assembly to help detach the display control.
5
Disconnect the three wire harness connecters to fully release the control.
6
Using the phillips-head screwdriver, unthread the four mounting screws to release the funnel and paddle assembly.
7
Detach the paddle.
8
You can now slide out the old funnel.
9
To install the new dispenser funnel…
10
… align it in the housing grooves and snap it into place.
11
Confirm the long end of the spring is inserted into the notch on the rear of the paddle…
12
… then hold the spring in place as you snap the paddle into place in the funnel notches.
13
Feed the wires through the funnel and paddle assembly as you position the assembly in the housing.
14
Secure the assembly with the four screws.
15
Reconnect the three wire harness connecters to the appropriate terminals on the back of the display control.
16
Reposition the control by aligning the top edge first, then snap the bottom edge into place.
17
Plug the appliance’s power cord back in…
18
… and the refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Dispenser Funnel Guide
$29.47
Total$0.00
Related Articles & Videos
01:40
Part Replacement
GE Refrigerator Dispenser Display Control Assembly Replacement WR55X34887
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com