Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairGE Refrigerator Condenser Fan Blade Replacement WR60X24484 
GE Refrigerator Condenser Fan Blade Replacement WR60X24484
Skill Level
Total Parts Cost
$34.16Estimated Savings
$112.5002:53
- Description
This video provides step-by-step repair instructions for replacing the condenser fan blade on a GE Refrigerator (Model GSE25GSHPCSS). The most common reason for replacing this part is if it is damaged or noisy.
All of the information for this video is applicable to the following brands: GE
All of the information for this video is applicable to the following brands: GE
Step By Step Instructions
1
To replace the condenser fan blade in this GE refrigerator…
2
… you will need a quarter-inch nut driver, and a 5/16th inch nut driver.
3
Before you begin the procedure, unplug the appliance’s power cord.
4
Have an assistant help you to move the refrigerator away from the wall.
5
Use the quarter-inch nut driver to unthread the upper center screw securing the water line retainer and lower rear access panel.
6
Next, unthread the five remaining screws securing the access panel using the 5/16th inch nut driver.
7
With the screws unthreaded, lift the panel up to remove.
8
Now reach in and pull the old fan blade off of the condenser fan motor shaft.
9
To install the new condenser fan blade…
10
… align it on the motor shaft and press to confirm it’s fully seated.
11
Replace the lower rear access panel by align the bottom tabs first.
12
Rethread the screws.
13
Secure the water line behind the retainer and rethread the upper center screw.
14
Move the appliance back against the wall.
15
Plug the appliance’s power cord back in…
16
… and the refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the condenser fan blade on a GE Refrigerator (Model GSE25GSHPCSS). The most common reason for replacing this part is if it is damaged or noisy.
All of the information for this video is applicable to the following brands: GE
All of the information for this video is applicable to the following brands: GE
Step-By-Step Instructions
1
To replace the condenser fan blade in this GE refrigerator…
2
… you will need a quarter-inch nut driver, and a 5/16th inch nut driver.
3
Before you begin the procedure, unplug the appliance’s power cord.
4
Have an assistant help you to move the refrigerator away from the wall.
5
Use the quarter-inch nut driver to unthread the upper center screw securing the water line retainer and lower rear access panel.
6
Next, unthread the five remaining screws securing the access panel using the 5/16th inch nut driver.
7
With the screws unthreaded, lift the panel up to remove.
8
Now reach in and pull the old fan blade off of the condenser fan motor shaft.
9
To install the new condenser fan blade…
10
… align it on the motor shaft and press to confirm it’s fully seated.
11
Replace the lower rear access panel by align the bottom tabs first.
12
Rethread the screws.
13
Secure the water line behind the retainer and rethread the upper center screw.
14
Move the appliance back against the wall.
15
Plug the appliance’s power cord back in…
16
… and the refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Condenser Fan Blade
$34.16
Total$0.00
Related Articles & Videos
01:40
Part Replacement
GE Refrigerator Dispenser Display Control Assembly Replacement WR55X34887
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com