Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairGE Top Load Washer Pump Hose Replacement #WH41X10163
GE Top Load Washer Pump Hose Replacement #WH41X10163
Skill Level
Total Parts Cost
$20.91Estimated Savings
$112.5001:56
- Description
This video provides step-by-step instructions for replacing the pump hose (connecting the bottom of the tub to the drain pump) on GE top-loading washing machines. The most common reason for replacing the hose is if the washer leaks or doesn’t drain.
All of the information in this hose replacement video is applicable to the following brands: GE
All of the information in this hose replacement video is applicable to the following brands: GE
Step By Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
Your first step is to insert a putty knife under the main top to release the two spring clips securing the front panel.
3
Pull the front panel forward and lift up to remove.
4
Release the clamps securing the old tub to pump hose.
5
Pull the hose off both the drain pump and the outer tub.
6
Be prepared for some water to spill out.
7
Install the new hose by first transferring the clamps from the old hose to the new one.
8
Now slide one end of the new hose onto the tub port and the other end onto the port on the drain pump.
9
Secure the hose with the clamps.
10
Reposition the front panel by aligning the tabs on the base with the slots at the bottom of the panel.
11
Align the pins on the front of the cabinet with the holes in the front panel and snap the panel into position.
12
You’re now ready to plug the power cord back in and confirm that the appliance is functioning properly.
Description
This video provides step-by-step instructions for replacing the pump hose (connecting the bottom of the tub to the drain pump) on GE top-loading washing machines. The most common reason for replacing the hose is if the washer leaks or doesn’t drain.
All of the information in this hose replacement video is applicable to the following brands: GE
All of the information in this hose replacement video is applicable to the following brands: GE
Step-By-Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
Your first step is to insert a putty knife under the main top to release the two spring clips securing the front panel.
3
Pull the front panel forward and lift up to remove.
4
Release the clamps securing the old tub to pump hose.
5
Pull the hose off both the drain pump and the outer tub.
6
Be prepared for some water to spill out.
7
Install the new hose by first transferring the clamps from the old hose to the new one.
8
Now slide one end of the new hose onto the tub port and the other end onto the port on the drain pump.
9
Secure the hose with the clamps.
10
Reposition the front panel by aligning the tabs on the base with the slots at the bottom of the panel.
11
Align the pins on the front of the cabinet with the holes in the front panel and snap the panel into position.
12
You’re now ready to plug the power cord back in and confirm that the appliance is functioning properly.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com