Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairGE Refrigerator Dispenser Chute Door Replacement WR17X11653 
GE Refrigerator Dispenser Chute Door Replacement WR17X11653
Skill Level
Total Parts Cost
$24.94Estimated Savings
$112.5002:50
- Description
This video provides step-by-step repair instructions for replacing the dispenser chute door on a GE Refrigerator (Model GSE25GSHPCSS). The most common reason for replacing this part is if it is damaged or missing.
All of the information for this video is applicable to the following brands: GE
All of the information for this video is applicable to the following brands: GE
Step By Step Instructions
1
To replace the dispenser door flap in your refrigerator use a small flat-head screwdriver to help pry the dispenser panel and control board out from the bottom.
2
Note the orientation of the wires connected to the board then disconnect them.
3
Now use a phillips-head screwdriver to unthread the screws securing the chute assembly.
4
Remove the assembly.
5
Remove the old dispenser door flap by releasing the upper tabs first then rotate the flap to fully detach.
6
Install the new dispenser door flap by hooking the lower tabs onto the arm then rotate the flap up to snap the upper tabs into place.
7
Making sure the wires extend over the chute assembly, reposition the assembly and replace the screws to secure.
8
The larger screws go in the bottom.
9
Reinstall the dispenser control board assembly by first reconnecting the wires to the appropriate terminals.
10
Now align the top of the dispenser panel and snap the bottom into place.
11
With the repair completed plug the power cord back in and your refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the dispenser chute door on a GE Refrigerator (Model GSE25GSHPCSS). The most common reason for replacing this part is if it is damaged or missing.
All of the information for this video is applicable to the following brands: GE
All of the information for this video is applicable to the following brands: GE
Step-By-Step Instructions
1
To replace the dispenser door flap in your refrigerator use a small flat-head screwdriver to help pry the dispenser panel and control board out from the bottom.
2
Note the orientation of the wires connected to the board then disconnect them.
3
Now use a phillips-head screwdriver to unthread the screws securing the chute assembly.
4
Remove the assembly.
5
Remove the old dispenser door flap by releasing the upper tabs first then rotate the flap to fully detach.
6
Install the new dispenser door flap by hooking the lower tabs onto the arm then rotate the flap up to snap the upper tabs into place.
7
Making sure the wires extend over the chute assembly, reposition the assembly and replace the screws to secure.
8
The larger screws go in the bottom.
9
Reinstall the dispenser control board assembly by first reconnecting the wires to the appropriate terminals.
10
Now align the top of the dispenser panel and snap the bottom into place.
11
With the repair completed plug the power cord back in and your refrigerator should be ready for use.
Applicable Product Model
Related Articles & Videos
01:40
Part Replacement
GE Refrigerator Dispenser Display Control Assembly Replacement WR55X34887
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com