Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairGE Refrigerator Front Wheel Adjuster Replacement WR02X12274 
GE Refrigerator Front Wheel Adjuster Replacement WR02X12274
Skill Level
Total Parts Cost
$48.22Estimated Savings
$112.5004:50
- Description
This video provides step-by-step repair instructions for replacing the front wheel adjuster on a GE Refrigerator (Model GSE25GSHPCSS). The most common reason for replacing this part is if it is damaged or missing.
All of the information for this video is applicable to the following brands: GE
All of the information for this video is applicable to the following brands: GE
Step By Step Instructions
1
To replace the front wheel adjuster assembly on this GE refrigerator…
2
… you will need a phillips-head screwdriver, a 3/8th inch nut driver, and a ratchet with a t-20 torx bit and quarter-inch socket.
3
Before you begin the procedure, unplug the appliance’s power cord.
4
For better access, detach the toe kick plate by using…
5
… the phillips-head screwdriver to unthread the two mounting screws.
6
With the screws unthreaded, pull the plate free.
7
Have an assistant help to lift up he appropriate side of the refrigrator and support it.
8
Use the ratchet and t-20 torx bit to unthread the two screws securing the hinge cam.
9
With the screws unthreaded, set the hinge cam aside.
10
Now use the 3/8th inch nut driver to unthread the front wheel adjusting bolt from the adjuster assembly’s speed nut.
11
Now use the ratchet with a quarter-inch socket to unthread the three screws securing the front wheel adjuster assembly.
12
With the screws unthreaded, you can set the old adjuster assembly aside.
13
To prepare the new front wheel adjuster assembly for installation…
14
… slide the speed nut into place in the assembly.
15
Now transfer the cardboard spacer from the old assembly to the new one.
16
Next, thread the front wheel adjusting bolt part-way into the speed nut.
17
Fully align the adjuster assembly on the frame…
18
… and thread the screws to secure.
19
With the assembly installed…
20
… reinsert the hinge cam guide pins into the holes in the bottom of the door…
21
… then thread and tighten the two screws to secure.
22
Remove the support and lower the side of the appliance.
23
If you need to level the refrigerator…
24
Rotate the adjusting bolt clockwise to lower the new wheel or counter-clockwise to raise the wheel.
25
With the refrigerator leveled…
26
… realign the toe kick plate on the lower frame and thread the two mounting screws to secure.
27
Plug the appliance’s power cord back in…
28
… and the refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the front wheel adjuster on a GE Refrigerator (Model GSE25GSHPCSS). The most common reason for replacing this part is if it is damaged or missing.
All of the information for this video is applicable to the following brands: GE
All of the information for this video is applicable to the following brands: GE
Step-By-Step Instructions
1
To replace the front wheel adjuster assembly on this GE refrigerator…
2
… you will need a phillips-head screwdriver, a 3/8th inch nut driver, and a ratchet with a t-20 torx bit and quarter-inch socket.
3
Before you begin the procedure, unplug the appliance’s power cord.
4
For better access, detach the toe kick plate by using…
5
… the phillips-head screwdriver to unthread the two mounting screws.
6
With the screws unthreaded, pull the plate free.
7
Have an assistant help to lift up he appropriate side of the refrigrator and support it.
8
Use the ratchet and t-20 torx bit to unthread the two screws securing the hinge cam.
9
With the screws unthreaded, set the hinge cam aside.
10
Now use the 3/8th inch nut driver to unthread the front wheel adjusting bolt from the adjuster assembly’s speed nut.
11
Now use the ratchet with a quarter-inch socket to unthread the three screws securing the front wheel adjuster assembly.
12
With the screws unthreaded, you can set the old adjuster assembly aside.
13
To prepare the new front wheel adjuster assembly for installation…
14
… slide the speed nut into place in the assembly.
15
Now transfer the cardboard spacer from the old assembly to the new one.
16
Next, thread the front wheel adjusting bolt part-way into the speed nut.
17
Fully align the adjuster assembly on the frame…
18
… and thread the screws to secure.
19
With the assembly installed…
20
… reinsert the hinge cam guide pins into the holes in the bottom of the door…
21
… then thread and tighten the two screws to secure.
22
Remove the support and lower the side of the appliance.
23
If you need to level the refrigerator…
24
Rotate the adjusting bolt clockwise to lower the new wheel or counter-clockwise to raise the wheel.
25
With the refrigerator leveled…
26
… realign the toe kick plate on the lower frame and thread the two mounting screws to secure.
27
Plug the appliance’s power cord back in…
28
… and the refrigerator should be ready for use.
Applicable Product Model
Related Articles & Videos
01:40
Part Replacement
GE Refrigerator Dispenser Display Control Assembly Replacement WR55X34887
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com