Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairGE Top Load Washer Drive Block Replacement #WH43X10037
GE Top Load Washer Drive Block Replacement #WH43X10037
Skill Level
Total Parts Cost
$3.98Estimated Savings
$112.5001:30
- Description
This video provides step-by-step instructions for replacing the drive block on GE top-load washing machines. The most common reason to replace the drive block is if it becomes worn, which causes the washer to make a loud knocking noise, not agitate, or not spin.
All of the information in this drive block replacement video is applicable to the following brands: GE
All of the information in this drive block replacement video is applicable to the following brands: GE
Step By Step Instructions
1
To replace the drive block, open the washer lid then lift up the dispenser cover and rotate the dispenser cup counter-clockwise to remove.
2
Use a 7/16th inch socket to remove the agitator bolt then lift off the agitator.
3
Remove the old drive block.
4
Install the new drive block by sliding it onto the agitator shaft.
5
Replace the agitator and secure it with the bolt.
6
Align the groove in the dispenser cup with the tabs in the agitator and rotate clockwise to lock it into place.
7
Close the dispenser cover.
8
With the new drive block installed, you’re now ready to plug the power cord back in and confirm that the appliance is functioning properly.
Description
This video provides step-by-step instructions for replacing the drive block on GE top-load washing machines. The most common reason to replace the drive block is if it becomes worn, which causes the washer to make a loud knocking noise, not agitate, or not spin.
All of the information in this drive block replacement video is applicable to the following brands: GE
All of the information in this drive block replacement video is applicable to the following brands: GE
Step-By-Step Instructions
1
To replace the drive block, open the washer lid then lift up the dispenser cover and rotate the dispenser cup counter-clockwise to remove.
2
Use a 7/16th inch socket to remove the agitator bolt then lift off the agitator.
3
Remove the old drive block.
4
Install the new drive block by sliding it onto the agitator shaft.
5
Replace the agitator and secure it with the bolt.
6
Align the groove in the dispenser cup with the tabs in the agitator and rotate clockwise to lock it into place.
7
Close the dispenser cover.
8
With the new drive block installed, you’re now ready to plug the power cord back in and confirm that the appliance is functioning properly.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com