Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Top-Load Washer Bleach Dispenser Replacement W11175768 
Whirlpool Top-Load Washer Bleach Dispenser Replacement W11175768
Skill Level
Total Parts Cost
$27.14Estimated Savings
$112.5002:39
- Description
This video provides step-by-step instructions for replacing the bleach dispenser on a Whirlpool top-loading washing machine, model WTW7120HW0. The most common reason for replacing this part is if it is damaged or missing.
All of the information in this part replacement video is applicable to the following brands: Whirlpool
All of the information in this part replacement video is applicable to the following brands: Whirlpool
Step By Step Instructions
1
To replace the bleach dispenser on this whirlpool top-load washer…
2
… you will need a quarter-inch nut driver.
3
Before you begin the procedure, unplug the appliance’s power cord.
4
Have an assistant help you to move the washer away from the wall.
5
Remove the scrub brush from the bleach dispenser to avoid the item falling out later.
6
Use the quarter-inch nut driver to unthread the two rear screws securing the main top…
7
… as well as the screw securing the access plate.
8
Remove the plate.
9
You can now pull the main top forward then lift it up, open the lid, and depress the tab to release the old bleach dispenser if still intact.
10
To install the new bleach dispenser…
11
… align the rear tab under the main top then snap the component into place.
12
Reposition the main top.
13
Rethread the two rear screws securing the main top.
14
Realign the access plate and secure it with the screw.
15
Move the washer back against the wall.
16
Replace the scrub brush in the new bleach dispenser.
17
Plug the appliance’s power cord back in…
18
… and the washer should be ready for use.
Description
This video provides step-by-step instructions for replacing the bleach dispenser on a Whirlpool top-loading washing machine, model WTW7120HW0. The most common reason for replacing this part is if it is damaged or missing.
All of the information in this part replacement video is applicable to the following brands: Whirlpool
All of the information in this part replacement video is applicable to the following brands: Whirlpool
Step-By-Step Instructions
1
To replace the bleach dispenser on this whirlpool top-load washer…
2
… you will need a quarter-inch nut driver.
3
Before you begin the procedure, unplug the appliance’s power cord.
4
Have an assistant help you to move the washer away from the wall.
5
Remove the scrub brush from the bleach dispenser to avoid the item falling out later.
6
Use the quarter-inch nut driver to unthread the two rear screws securing the main top…
7
… as well as the screw securing the access plate.
8
Remove the plate.
9
You can now pull the main top forward then lift it up, open the lid, and depress the tab to release the old bleach dispenser if still intact.
10
To install the new bleach dispenser…
11
… align the rear tab under the main top then snap the component into place.
12
Reposition the main top.
13
Rethread the two rear screws securing the main top.
14
Realign the access plate and secure it with the screw.
15
Move the washer back against the wall.
16
Replace the scrub brush in the new bleach dispenser.
17
Plug the appliance’s power cord back in…
18
… and the washer should be ready for use.
Applicable Product Model
Related Articles & Videos
05:14
Part Replacement
Whirlpool Top-Load Washer Water Inlet Valve Replacement 218605101
05:41
Part Replacement
Whirlpool Top-Load Washer Lid Lock Assembly Replacement W11394572
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com