Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Top-Load Washer Tub-To-Pump Hose Replacement W10802689 
Whirlpool Top-Load Washer Tub-To-Pump Hose Replacement W10802689
Skill Level
Total Parts Cost
$30.10Estimated Savings
$112.5003:28
- Description
This video provides step-by-step instructions for replacing the tub-to-pump hose on a Whirlpool top-loading washing machine, model WTW7120HW0. The most common reason for replacing this part is if the washer is leaking.
All of the information in this part replacement video is applicable to the following brands: Whirlpool
All of the information in this part replacement video is applicable to the following brands: Whirlpool
Step By Step Instructions
1
To replace the tub-to-pump hose in this whirlpool top-load washer…
2
… you will need channel-lock pliers.
3
Before you begin the procedure, unplug the appliance’s power cord…
4
… and shut off the incoming water supply.
5
Unthread the hot and cold water supply hoses from the inlet valve ports – be prepared for some water to spill.
6
Use the channel-lock pliers to release the spring clamp so you can detach the drain hose from the outlet port.
7
Now have an assistant help you to move the washer away from the wall…
8
… and tip the appliance back so its rear panel rests on a towel or blanket.
9
You can now use the channel-lock pliers to release the spring clamps securing the hose to the outer tub and drain pump and remove the old hose.
10
To prepare the new tub-to-pump hose for installation…
11
… transfer the spring clamps from the old hose to the new one.
12
Now attach the curved end of the new hose to the port on the outer tub and secure it with the clamp.
13
Do the same to secure the opposite end of the hose to the port on the drain pump.
14
Return the washer to its upright position…
15
… and move the appliance back against the wall.
16
Reattach the drain hose to the outlet port, securing it with the clamp.
17
Attach the hot and cold water supply hoses to the appropriate inlet valve ports.
18
Turn the water supply back on…
19
… plug the appliance’s power cord back in…
20
… and the washer should be ready for use.
Description
This video provides step-by-step instructions for replacing the tub-to-pump hose on a Whirlpool top-loading washing machine, model WTW7120HW0. The most common reason for replacing this part is if the washer is leaking.
All of the information in this part replacement video is applicable to the following brands: Whirlpool
All of the information in this part replacement video is applicable to the following brands: Whirlpool
Step-By-Step Instructions
1
To replace the tub-to-pump hose in this whirlpool top-load washer…
2
… you will need channel-lock pliers.
3
Before you begin the procedure, unplug the appliance’s power cord…
4
… and shut off the incoming water supply.
5
Unthread the hot and cold water supply hoses from the inlet valve ports – be prepared for some water to spill.
6
Use the channel-lock pliers to release the spring clamp so you can detach the drain hose from the outlet port.
7
Now have an assistant help you to move the washer away from the wall…
8
… and tip the appliance back so its rear panel rests on a towel or blanket.
9
You can now use the channel-lock pliers to release the spring clamps securing the hose to the outer tub and drain pump and remove the old hose.
10
To prepare the new tub-to-pump hose for installation…
11
… transfer the spring clamps from the old hose to the new one.
12
Now attach the curved end of the new hose to the port on the outer tub and secure it with the clamp.
13
Do the same to secure the opposite end of the hose to the port on the drain pump.
14
Return the washer to its upright position…
15
… and move the appliance back against the wall.
16
Reattach the drain hose to the outlet port, securing it with the clamp.
17
Attach the hot and cold water supply hoses to the appropriate inlet valve ports.
18
Turn the water supply back on…
19
… plug the appliance’s power cord back in…
20
… and the washer should be ready for use.
Applicable Product Model
Related Articles & Videos
05:14
Part Replacement
Whirlpool Top-Load Washer Water Inlet Valve Replacement 218605101
05:41
Part Replacement
Whirlpool Top-Load Washer Lid Lock Assembly Replacement W11394572
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com