Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairLG Electric Dryer Drum Belt Replacement 4400EL2001F 
LG Electric Dryer Drum Belt Replacement 4400EL2001F
Skill Level
Total Parts Cost
$37.35Estimated Savings
$112.5008:50
- Description
This video provides step-by-step repair instructions for replacing the belt on an LG electric dryer (model DLEX4000B). The most common reason for replacing this part is if the drum will not spin.
This coil replacement video is applicable to the following brands:
LG
Don't forget to like and comment on this video and subscribe to our channel!
This coil replacement video is applicable to the following brands:
LG
Don't forget to like and comment on this video and subscribe to our channel!
Step By Step Instructions
1
As with any repair, you should unplug the appliance before beginning.
2
To replace the belt on your dryer, first remove the screws securing the main top to the cabinet.
3
Slide the top back and lift up to remove.
4
Next, uninstall the screws securing the control panel.
5
Now lift up the tabs to detach the control panel from the support bracket and move it out of the way.
6
Remove the screws securing the support bracket so you can detach the bracket from the cabinet.
7
Detach the door switch wire harness remove the wire from the retainer and set the bracket aside.
8
Open the dryer door and support the front panel as you remove the lower two screws to release it.
9
Pull the panel forward and lift up to remove.
10
Disconnect the light switch wire harness and the moisture sensor wire harness.
11
Remove the screws from the front bulkhead mounting brackets.
12
Remove the screw securing the duct housing to the blower assembly.
13
Now lift the front bulkhead up and pull it forward to remove.
14
Reach under the drum and push the idler pulley to release the tension on the belt, if still intact, and pull the belt off of the motor pulley.
15
Remove the belt from the drum.
16
Install the new belt by sliding it over the drum, ribbed-side down.
17
Loop the belt around the idler and motor pulleys in a zig-zag formation.
18
Now, rotate the drum to help align the belt.
19
Replace the front bulkhead by inserting the bracket tabs into the slots in the side panels and aligning the drum on the front rollers.
20
Secure the bulkhead by replacing the bracket screws.
21
Secure the duct housing screw.
22
Reconnect the moisture sensor wire harness and the light switch wire harness.
23
Replace the front panel by aligning the slots in the panel with the tabs on the frame.
24
Position the panel open the door and replace the screws to secure.
25
Reposition the support bracket by inserting the tabs into the slots in the side panels.
26
Reattach the door switch wire harness and secure the wire in the retainer.
27
Replace all of the screws.
28
Reposition the control panel and snap it into place.
29
Reinstall the screws.
30
Align the main top on the cabinet then push forward.
31
Secure the screws in the back.
32
You’re now ready to plug the power cord back in and confirm that the dryer is functioning properly.
Description
This video provides step-by-step repair instructions for replacing the belt on an LG electric dryer (model DLEX4000B). The most common reason for replacing this part is if the drum will not spin.
This coil replacement video is applicable to the following brands:
LG
Don't forget to like and comment on this video and subscribe to our channel!
This coil replacement video is applicable to the following brands:
LG
Don't forget to like and comment on this video and subscribe to our channel!
Step-By-Step Instructions
1
As with any repair, you should unplug the appliance before beginning.
2
To replace the belt on your dryer, first remove the screws securing the main top to the cabinet.
3
Slide the top back and lift up to remove.
4
Next, uninstall the screws securing the control panel.
5
Now lift up the tabs to detach the control panel from the support bracket and move it out of the way.
6
Remove the screws securing the support bracket so you can detach the bracket from the cabinet.
7
Detach the door switch wire harness remove the wire from the retainer and set the bracket aside.
8
Open the dryer door and support the front panel as you remove the lower two screws to release it.
9
Pull the panel forward and lift up to remove.
10
Disconnect the light switch wire harness and the moisture sensor wire harness.
11
Remove the screws from the front bulkhead mounting brackets.
12
Remove the screw securing the duct housing to the blower assembly.
13
Now lift the front bulkhead up and pull it forward to remove.
14
Reach under the drum and push the idler pulley to release the tension on the belt, if still intact, and pull the belt off of the motor pulley.
15
Remove the belt from the drum.
16
Install the new belt by sliding it over the drum, ribbed-side down.
17
Loop the belt around the idler and motor pulleys in a zig-zag formation.
18
Now, rotate the drum to help align the belt.
19
Replace the front bulkhead by inserting the bracket tabs into the slots in the side panels and aligning the drum on the front rollers.
20
Secure the bulkhead by replacing the bracket screws.
21
Secure the duct housing screw.
22
Reconnect the moisture sensor wire harness and the light switch wire harness.
23
Replace the front panel by aligning the slots in the panel with the tabs on the frame.
24
Position the panel open the door and replace the screws to secure.
25
Reposition the support bracket by inserting the tabs into the slots in the side panels.
26
Reattach the door switch wire harness and secure the wire in the retainer.
27
Replace all of the screws.
28
Reposition the control panel and snap it into place.
29
Reinstall the screws.
30
Align the main top on the cabinet then push forward.
31
Secure the screws in the back.
32
You’re now ready to plug the power cord back in and confirm that the dryer is functioning properly.
Applicable Product Model
Parts Needed
Drive Belt
$37.35
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com