Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairLG Washer Power Cord Replacement EAD65212501
This video provides step-by-step repair instructions for replacing the power cord in an LG washer (Model WM4000HBA). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
LG
Don't forget to like and comment on this video and subscribe to our channel!
LG Washer Power Cord Replacement EAD65212501
Skill Level
Total Parts Cost
$225.15Estimated Savings
$112.5002:46
- Description
This video provides step-by-step repair instructions for replacing the power cord in an LG washer (Model WM4000HBA). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
LG
Don't forget to like and comment on this video and subscribe to our channel!
Step By Step Instructions
1
To replace the power cord in your lg washer, you will need pliers and a drill driver with a phillips bit.
2
Before you begin the procedure, unplug the washer.
3
Pull the washer away from the wall.
4
Unthread the two screws on the top panel.
5
Slide and lift the top panel off.
6
Unthread the ground screw and hold onto it for the new cord
7
Unplug the power cord.
8
Twist the power cord and feed it through the body.
9
To install the new power cord, feed the power cord through the body and twist it to lock in place.
10
Plug in the power cord harness.
11
Rethread the ground screw.
12
Set and slide the top panel onto the washer.
13
Rethread the two screws onto the panel.
14
Push the washer back into place.
15
Plug in the power, and your washer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the power cord in an LG washer (Model WM4000HBA). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
LG
Don't forget to like and comment on this video and subscribe to our channel!
This video provides step-by-step repair instructions for replacing the power cord in an LG washer (Model WM4000HBA). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
LG
Don't forget to like and comment on this video and subscribe to our channel!
Step-By-Step Instructions
1
To replace the power cord in your lg washer, you will need pliers and a drill driver with a phillips bit.
2
Before you begin the procedure, unplug the washer.
3
Pull the washer away from the wall.
4
Unthread the two screws on the top panel.
5
Slide and lift the top panel off.
6
Unthread the ground screw and hold onto it for the new cord
7
Unplug the power cord.
8
Twist the power cord and feed it through the body.
9
To install the new power cord, feed the power cord through the body and twist it to lock in place.
10
Plug in the power cord harness.
11
Rethread the ground screw.
12
Set and slide the top panel onto the washer.
13
Rethread the two screws onto the panel.
14
Push the washer back into place.
15
Plug in the power, and your washer should be ready for use.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com