Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenAid Dishwasher Water Supply Tube Replacement W11507999
This video provides step-by-step repair instructions for replacing the water supply tube on a KitchenAid dishwasher. The most common reason for replacing this part is if it is damaged or missing.
All of the information for this replacement video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool, Ikea, Amana, Jenn Air, Maytag
KitchenAid Dishwasher Water Supply Tube Replacement W11507999
Skill Level
Total Parts Cost
$75.73Estimated Savings
$112.5003:16
- Description
This video provides step-by-step repair instructions for replacing the water supply tube on a KitchenAid dishwasher. The most common reason for replacing this part is if it is damaged or missing.
All of the information for this replacement video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool, Ikea, Amana, Jenn Air, Maytag
Step By Step Instructions
1
To replace the water supply tube in this kitchenaid dishwasher, you will need a small flat-head screwdriver.
2
Open the dishwasher door and remove the lower dishrack.
3
Pull out the upper dishrack, then open the front rack stops and fully remove the upper dishrack.
4
Pull out the third level rack, open the front rack stops and remove the rack from the rails.
5
Uninstall the lower spray arm by lifting up and rotating counter-clockwise.
6
Now use the small flat-head screwdriver to help pry open the top and rear panel bracket tabs to release the water tube assembly.
7
Detach the assembly from the diverter cover to fully remove.
8
Using the screwdriver, pry off the spray arm retainer to release the spray arm from the assembly.
9
Pull the sides of the docking retainer outward to detach it from the tube.
10
You’re now ready to prepare the new water supply tube for installation.
11
Align the docking retainer on the tube and snap it into place.
12
Align the spray arm on the new water suppy tube and secure with the existing retainer or a new retainer if necessary.
13
Now insert the lower water tube assembly ports into the diverter cover, then snap the assembly into place in the rear and top panel brackets.
14
Reinstall the lower spray arm by inserting it into the support and rotating clockwise until it drops into place.
15
Realign the third level rack rollers on the rails, slide the rack in, and close the front rack stops.
16
Do the same to reinstall the upper dishrack.
17
Replace the lower dishrack and the dishwasher should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the water supply tube on a KitchenAid dishwasher. The most common reason for replacing this part is if it is damaged or missing.
All of the information for this replacement video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool, Ikea, Amana, Jenn Air, Maytag
This video provides step-by-step repair instructions for replacing the water supply tube on a KitchenAid dishwasher. The most common reason for replacing this part is if it is damaged or missing.
All of the information for this replacement video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool, Ikea, Amana, Jenn Air, Maytag
Step-By-Step Instructions
1
To replace the water supply tube in this kitchenaid dishwasher, you will need a small flat-head screwdriver.
2
Open the dishwasher door and remove the lower dishrack.
3
Pull out the upper dishrack, then open the front rack stops and fully remove the upper dishrack.
4
Pull out the third level rack, open the front rack stops and remove the rack from the rails.
5
Uninstall the lower spray arm by lifting up and rotating counter-clockwise.
6
Now use the small flat-head screwdriver to help pry open the top and rear panel bracket tabs to release the water tube assembly.
7
Detach the assembly from the diverter cover to fully remove.
8
Using the screwdriver, pry off the spray arm retainer to release the spray arm from the assembly.
9
Pull the sides of the docking retainer outward to detach it from the tube.
10
You’re now ready to prepare the new water supply tube for installation.
11
Align the docking retainer on the tube and snap it into place.
12
Align the spray arm on the new water suppy tube and secure with the existing retainer or a new retainer if necessary.
13
Now insert the lower water tube assembly ports into the diverter cover, then snap the assembly into place in the rear and top panel brackets.
14
Reinstall the lower spray arm by inserting it into the support and rotating clockwise until it drops into place.
15
Realign the third level rack rollers on the rails, slide the rack in, and close the front rack stops.
16
Do the same to reinstall the upper dishrack.
17
Replace the lower dishrack and the dishwasher should be ready for use.
Applicable Product Model
Parts Needed
Tube
$75.73
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com