Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenAid Dishwasher Drain Vent Replacement W11050773 
This video provides step-by-step repair instructions for replacing the drain vent on a KitchenAid dishwasher. The most common reason for replacing this part is if the dishwasher will not drain properly.
All of the information for this replacement video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool, Ikea, Amana, Jenn Air, Maytag
KitchenAid Dishwasher Drain Vent Replacement W11050773
Skill Level
Total Parts Cost
$14.55Estimated Savings
$112.5001:36
- Description
This video provides step-by-step repair instructions for replacing the drain vent on a KitchenAid dishwasher. The most common reason for replacing this part is if the dishwasher will not drain properly.
All of the information for this replacement video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool, Ikea, Amana, Jenn Air, Maytag
Step By Step Instructions
1
To replace the drain vent in this kitchenaid dishwasher, you will need a t-15 torx bit.
2
Open the dishwasher door and remove the lower dishrack.
3
Rotate the micro filter counter-clockwise then lift up to remove.
4
Lift out the filter screen.
5
You can now use the t-15 torx bit to unthread the screw to release the old drain vent.
6
To install the new drain vent, insert it into the sump and rethread the screw to secure.
7
Realign the filter screen on the floor of the tub with the rear of the screen positioned under the diverter cover tabs.
8
Realign the micro filter in the sump and rotate clockwise to lock it into place.
9
Replace the lower dishrack and the dishwasher should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the drain vent on a KitchenAid dishwasher. The most common reason for replacing this part is if the dishwasher will not drain properly.
All of the information for this replacement video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool, Ikea, Amana, Jenn Air, Maytag
This video provides step-by-step repair instructions for replacing the drain vent on a KitchenAid dishwasher. The most common reason for replacing this part is if the dishwasher will not drain properly.
All of the information for this replacement video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool, Ikea, Amana, Jenn Air, Maytag
Step-By-Step Instructions
1
To replace the drain vent in this kitchenaid dishwasher, you will need a t-15 torx bit.
2
Open the dishwasher door and remove the lower dishrack.
3
Rotate the micro filter counter-clockwise then lift up to remove.
4
Lift out the filter screen.
5
You can now use the t-15 torx bit to unthread the screw to release the old drain vent.
6
To install the new drain vent, insert it into the sump and rethread the screw to secure.
7
Realign the filter screen on the floor of the tub with the rear of the screen positioned under the diverter cover tabs.
8
Realign the micro filter in the sump and rotate clockwise to lock it into place.
9
Replace the lower dishrack and the dishwasher should be ready for use.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com