Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenAid Dishwasher Rear Rack Stop Replacement W11579392 
This video provides step-by-step repair instructions for replacing the rear rack stop on a KitchenAid dishwasher. The most common reason for replacing this part is if it is damaged or missing.
All of the information for this replacement video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool, Ikea, Amana, Jenn Air, Maytag
KitchenAid Dishwasher Rear Rack Stop Replacement W11579392
Skill Level
Total Parts Cost
$19.49Estimated Savings
$112.5001:22
- Description
This video provides step-by-step repair instructions for replacing the rear rack stop on a KitchenAid dishwasher. The most common reason for replacing this part is if it is damaged or missing.
All of the information for this replacement video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool, Ikea, Amana, Jenn Air, Maytag
Step By Step Instructions
1
To replace a rear rack stop in this kitchenaid dishwasher, you will need a small flat-head screwdriver.
2
Pull out the upper dishrack or the third level rack, then open the front rack stops and fully remove the rack.
3
You can now use the small flat-head screwdriver to depress the retaining tab so you can lift the old rear rack stop off the rail.
4
To install the new rack stop, insert the retaining tab through the holes in the rail and snap it into place.
5
Realign the upper dishrack rollers or third level rack rollers on the rails, slide the rack in, and close the front rack stops.
Description
This video provides step-by-step repair instructions for replacing the rear rack stop on a KitchenAid dishwasher. The most common reason for replacing this part is if it is damaged or missing.
All of the information for this replacement video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool, Ikea, Amana, Jenn Air, Maytag
This video provides step-by-step repair instructions for replacing the rear rack stop on a KitchenAid dishwasher. The most common reason for replacing this part is if it is damaged or missing.
All of the information for this replacement video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool, Ikea, Amana, Jenn Air, Maytag
Step-By-Step Instructions
1
To replace a rear rack stop in this kitchenaid dishwasher, you will need a small flat-head screwdriver.
2
Pull out the upper dishrack or the third level rack, then open the front rack stops and fully remove the rack.
3
You can now use the small flat-head screwdriver to depress the retaining tab so you can lift the old rear rack stop off the rail.
4
To install the new rack stop, insert the retaining tab through the holes in the rail and snap it into place.
5
Realign the upper dishrack rollers or third level rack rollers on the rails, slide the rack in, and close the front rack stops.
Applicable Product Model
Parts Needed
Dishrack Stop Clip
$19.49
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com