Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenAid Dishwasher Upper Dishrack Roller Replacement W11545296 
This video provides step-by-step repair instructions for replacing the upper dishrack roller on a KitchenAid dishwasher. The most common reason for replacing this part is if the dishrack will not roll properly.
All of the information for this replacement video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool, Ikea, Amana, Jenn Air, Maytag
KitchenAid Dishwasher Upper Dishrack Roller Replacement W11545296
Skill Level
Total Parts Cost
$23.60Estimated Savings
$112.5002:01
- Description
This video provides step-by-step repair instructions for replacing the upper dishrack roller on a KitchenAid dishwasher. The most common reason for replacing this part is if the dishrack will not roll properly.
All of the information for this replacement video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool, Ikea, Amana, Jenn Air, Maytag
Step By Step Instructions
1
To replace an upper dishrack roller in this kitchenaid dishwasher, you will need a small flat-head screwdriver and a t-10 torx bit.
2
Pull out the upper dishrack, then open the front rack stops and fully remove the upper dishrack.
3
Now insert the small flat-head screwdrver into the appropriate slot in the rack adjuster assembly to depress the tab to release the rack adjuster clip.
4
Use the t-10 torx bit to unthread the mounting screw to release the old roller, if still intact.
5
To install the new upper dishrack roller, align it in the adjuster and thread the mounting screw to secure.
6
Confirm the roller spins freely, then realign the adjuster clip on the inside of the adjuster and snap it into place.
7
You can now align the upper rack rollers on the rails, slide the rack in, and close the front rack stops.
Description
This video provides step-by-step repair instructions for replacing the upper dishrack roller on a KitchenAid dishwasher. The most common reason for replacing this part is if the dishrack will not roll properly.
All of the information for this replacement video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool, Ikea, Amana, Jenn Air, Maytag
This video provides step-by-step repair instructions for replacing the upper dishrack roller on a KitchenAid dishwasher. The most common reason for replacing this part is if the dishrack will not roll properly.
All of the information for this replacement video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool, Ikea, Amana, Jenn Air, Maytag
Step-By-Step Instructions
1
To replace an upper dishrack roller in this kitchenaid dishwasher, you will need a small flat-head screwdriver and a t-10 torx bit.
2
Pull out the upper dishrack, then open the front rack stops and fully remove the upper dishrack.
3
Now insert the small flat-head screwdrver into the appropriate slot in the rack adjuster assembly to depress the tab to release the rack adjuster clip.
4
Use the t-10 torx bit to unthread the mounting screw to release the old roller, if still intact.
5
To install the new upper dishrack roller, align it in the adjuster and thread the mounting screw to secure.
6
Confirm the roller spins freely, then realign the adjuster clip on the inside of the adjuster and snap it into place.
7
You can now align the upper rack rollers on the rails, slide the rack in, and close the front rack stops.
Applicable Product Model
Parts Needed
Roller
$23.60
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com