Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairGE Dryer Door Latch Replacement WE01X25316
This video provides step-by-step repair instructions for replacing the door latch in a GE dryer (Model GTD42EASJ2WW). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
GE
Screws affiliated with dryer-
Don't forget to like and comment on this video and subscribe to our channel!
GE Dryer Door Latch Replacement WE01X25316
Skill Level
Total Parts Cost
$34.65Estimated Savings
$112.5005:18
- Description
This video provides step-by-step repair instructions for replacing the door latch in a GE dryer (Model GTD42EASJ2WW). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
GE
Screws affiliated with dryer-
Don't forget to like and comment on this video and subscribe to our channel!
Step By Step Instructions
1
To replace the door latch in your ge dryer, you will need a drill driver with a 1/4" bit, a #1 square head bit, pliers, and needlenose pliers.
2
Unthread and remove the bottom screw on each hinge then loosen the top screw on each hinge.
3
Lift the door up and away from the screws.
4
Unthread the five screws on the hinge side of the door.
5
Unthread the three screws on the latch side of the door.
6
Gently pry the door apart.
7
Using the pliers, squeeze the gray tabs together and push down until they clear the panel.
8
With the needlenose pliers, squeeze the metal retaining clip and apply downward force until the clip is free from the panel.
9
To install the new door latch.
10
Insert the latch into the panel and snap it in place.
11
Slide the hinges onto the panel.
12
Set the door panels back together. make sure the door handles overlap the outer panel.
13
Rethread the three screws on the latch side of the door.
14
Rethread the five screws on the hinge side of the door.
15
Set the door hinges over the loosened screws.
16
Rethread the bottom screws on each hinge, then fully tighten all four screws, and your dryer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the door latch in a GE dryer (Model GTD42EASJ2WW). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
GE
Screws affiliated with dryer-
Don't forget to like and comment on this video and subscribe to our channel!
This video provides step-by-step repair instructions for replacing the door latch in a GE dryer (Model GTD42EASJ2WW). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
GE
Screws affiliated with dryer-
Don't forget to like and comment on this video and subscribe to our channel!
Step-By-Step Instructions
1
To replace the door latch in your ge dryer, you will need a drill driver with a 1/4" bit, a #1 square head bit, pliers, and needlenose pliers.
2
Unthread and remove the bottom screw on each hinge then loosen the top screw on each hinge.
3
Lift the door up and away from the screws.
4
Unthread the five screws on the hinge side of the door.
5
Unthread the three screws on the latch side of the door.
6
Gently pry the door apart.
7
Using the pliers, squeeze the gray tabs together and push down until they clear the panel.
8
With the needlenose pliers, squeeze the metal retaining clip and apply downward force until the clip is free from the panel.
9
To install the new door latch.
10
Insert the latch into the panel and snap it in place.
11
Slide the hinges onto the panel.
12
Set the door panels back together. make sure the door handles overlap the outer panel.
13
Rethread the three screws on the latch side of the door.
14
Rethread the five screws on the hinge side of the door.
15
Set the door hinges over the loosened screws.
16
Rethread the bottom screws on each hinge, then fully tighten all four screws, and your dryer should be ready for use.
Applicable Product Model
Parts Needed
Door Catch
$34.65
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com