Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairGE Dryer Door Hinge Replacement WE01X25317
This video provides step-by-step repair instructions for replacing the door hinge on a GE dryer (Model GTD42EASJ2WW). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
GE
Screws affiliated with dryer-
Don't forget to like and comment on this video and subscribe to our channel!
GE Dryer Door Hinge Replacement WE01X25317
Skill Level
Total Parts Cost
$34.47Estimated Savings
$112.5003:16
- Description
This video provides step-by-step repair instructions for replacing the door hinge on a GE dryer (Model GTD42EASJ2WW). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
GE
Screws affiliated with dryer-
Don't forget to like and comment on this video and subscribe to our channel!
Step By Step Instructions
1
To replace the door hinge in your ge dryer, you will need a drill driver with a 1/4” bit, and a #1 square head bit.
2
Unthread and remove the bottom screw on each hinge, then loosen the top screws.
3
Lift the door up and away from the screws.
4
Unthread the center screw in the panel, then unthread the two screws securing the hinge.
5
Gently pry the door panels apart to remove the hinge.
6
To install the new door hinge.
7
Insert the hinge between the panels and slide it into position.
8
Press the two panels together.
9
Rethread the two screws on the hinge, as well as the center screw to secure the panels.
10
Set the door hinges over the loosened screws.
11
Rethread the bottom screws on each hinge, then fully tighten all four screws, and your dryer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the door hinge on a GE dryer (Model GTD42EASJ2WW). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
GE
Screws affiliated with dryer-
Don't forget to like and comment on this video and subscribe to our channel!
This video provides step-by-step repair instructions for replacing the door hinge on a GE dryer (Model GTD42EASJ2WW). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
GE
Screws affiliated with dryer-
Don't forget to like and comment on this video and subscribe to our channel!
Step-By-Step Instructions
1
To replace the door hinge in your ge dryer, you will need a drill driver with a 1/4” bit, and a #1 square head bit.
2
Unthread and remove the bottom screw on each hinge, then loosen the top screws.
3
Lift the door up and away from the screws.
4
Unthread the center screw in the panel, then unthread the two screws securing the hinge.
5
Gently pry the door panels apart to remove the hinge.
6
To install the new door hinge.
7
Insert the hinge between the panels and slide it into position.
8
Press the two panels together.
9
Rethread the two screws on the hinge, as well as the center screw to secure the panels.
10
Set the door hinges over the loosened screws.
11
Rethread the bottom screws on each hinge, then fully tighten all four screws, and your dryer should be ready for use.
Applicable Product Model
Parts Needed
Door Hinge
$34.47
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com