Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairGE Dryer Extended Tumble Switch Replacement WE04X24717
This video provides step-by-step repair instructions for replacing the extended tumble switch in a GE dryer (Model GTD42EASJ2WW). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
GE
Screws affiliated with dryer-
Don't forget to like and comment on this video and subscribe to our channel!
GE Dryer Extended Tumble Switch Replacement WE04X24717
Skill Level
Total Parts Cost
$8.40Estimated Savings
$112.5003:42
- Description
This video provides step-by-step repair instructions for replacing the extended tumble switch in a GE dryer (Model GTD42EASJ2WW). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
GE
Screws affiliated with dryer-
Don't forget to like and comment on this video and subscribe to our channel!
Step By Step Instructions
1
To replace the extended tumble switch in your ge dryer, you will need a drill driver with a 1/4” bit and needlenose pliers.
2
Before you begin the procedure, unplug the power to the appliance.
3
Pull off the knob from the backsplash.
4
Unthread the five screws on the panel.
5
Pull out and lift the panel from the backsplash.
6
Detatch the ground wire.
7
Unthread the two screws that secure the backsplash.
8
Pull the backsplash back, and lift up to free it from the dryer.
9
Noting the orientation of the wires, detatch the wires from the switch.
10
Depress the tab and twist the switch counterclockwise to remove.
11
To install the new extended tumble switch, insert the switch and twist clockwise to lock in place.
12
Reattach the wires.
13
Set the backsplash back into the dryer slots and push forward to lock in place.
14
Rethread the two screws.
15
Reattach the ground wire to the panel.
16
Insert the panel tabs into the slots on the dryer.
17
Rethread the five screws.
18
Align the knob with the d-shaft and press into place.
19
Plug in the dryer, and your washer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the extended tumble switch in a GE dryer (Model GTD42EASJ2WW). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
GE
Screws affiliated with dryer-
Don't forget to like and comment on this video and subscribe to our channel!
This video provides step-by-step repair instructions for replacing the extended tumble switch in a GE dryer (Model GTD42EASJ2WW). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
GE
Screws affiliated with dryer-
Don't forget to like and comment on this video and subscribe to our channel!
Step-By-Step Instructions
1
To replace the extended tumble switch in your ge dryer, you will need a drill driver with a 1/4” bit and needlenose pliers.
2
Before you begin the procedure, unplug the power to the appliance.
3
Pull off the knob from the backsplash.
4
Unthread the five screws on the panel.
5
Pull out and lift the panel from the backsplash.
6
Detatch the ground wire.
7
Unthread the two screws that secure the backsplash.
8
Pull the backsplash back, and lift up to free it from the dryer.
9
Noting the orientation of the wires, detatch the wires from the switch.
10
Depress the tab and twist the switch counterclockwise to remove.
11
To install the new extended tumble switch, insert the switch and twist clockwise to lock in place.
12
Reattach the wires.
13
Set the backsplash back into the dryer slots and push forward to lock in place.
14
Rethread the two screws.
15
Reattach the ground wire to the panel.
16
Insert the panel tabs into the slots on the dryer.
17
Rethread the five screws.
18
Align the knob with the d-shaft and press into place.
19
Plug in the dryer, and your washer should be ready for use.
Applicable Product Model
Parts Needed
Rotary Switch
$8.40
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com