Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairGE Dryer Selector Knob Replacement WH01X24378
This video provides step-by-step repair instructions for replacing the selector knob on a GE dryer (Model GTD42EASJ2WW). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
GE
Don't forget to like and comment on this video and subscribe to our channel!
GE Dryer Selector Knob Replacement WH01X24378
Skill Level
Total Parts Cost
$12.84Estimated Savings
$112.5000:45
- Description
This video provides step-by-step repair instructions for replacing the selector knob on a GE dryer (Model GTD42EASJ2WW). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
GE
Don't forget to like and comment on this video and subscribe to our channel!
Step By Step Instructions
1
To replace the exhaust duct in your ge dryer, you will need a drill driver with a 1/4” bit.
2
To replace the selector knob on either the extended tumble, temperature, or signal options on your ge dryer, remove the knob from the backsplash.
3
To replace the selector knob on either the water level, temperature, options, or autosoak on your ge washer, remove the knob from the backsplash.
4
To install the new knob, align the knob on the d-shaft and press into place, and your dryer should be ready for use.
5
To install the new selector knob.
6
Before you begin the procedure, unplug the power to the appliance.
7
Align the knob on the d-shaft and press into place.
8
Loosen the clamp or unthread the screw holding the ductwork to the appliance.
9
Unthread the 1/4" screw securing the exhaust duct to the back panel.
10
Pull out the old exhaust duct
11
To install the new exhaust duct
12
Insert the duct into the dryer and seat it over the exhaust gasket. you can use a flashlight to help guide the duct.
13
Rethread the screw to secure the duct to the back panel.
14
Tighten the clamp or rethread the screw to secure the ductwork to the appliance.
15
Plug in the dryer, and your dryer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the selector knob on a GE dryer (Model GTD42EASJ2WW). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
GE
Don't forget to like and comment on this video and subscribe to our channel!
This video provides step-by-step repair instructions for replacing the selector knob on a GE dryer (Model GTD42EASJ2WW). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
GE
Don't forget to like and comment on this video and subscribe to our channel!
Step-By-Step Instructions
1
To replace the exhaust duct in your ge dryer, you will need a drill driver with a 1/4” bit.
2
To replace the selector knob on either the extended tumble, temperature, or signal options on your ge dryer, remove the knob from the backsplash.
3
To replace the selector knob on either the water level, temperature, options, or autosoak on your ge washer, remove the knob from the backsplash.
4
To install the new knob, align the knob on the d-shaft and press into place, and your dryer should be ready for use.
5
To install the new selector knob.
6
Before you begin the procedure, unplug the power to the appliance.
7
Align the knob on the d-shaft and press into place.
8
Loosen the clamp or unthread the screw holding the ductwork to the appliance.
9
Unthread the 1/4" screw securing the exhaust duct to the back panel.
10
Pull out the old exhaust duct
11
To install the new exhaust duct
12
Insert the duct into the dryer and seat it over the exhaust gasket. you can use a flashlight to help guide the duct.
13
Rethread the screw to secure the duct to the back panel.
14
Tighten the clamp or rethread the screw to secure the ductwork to the appliance.
15
Plug in the dryer, and your dryer should be ready for use.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com