Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Top-Load Washer Won't Spin? Drive Belt #W10006384
Whirlpool Top-Load Washer Won't Spin? Drive Belt #W10006384
Skill Level
Total Parts Cost
$32.42Estimated Savings
$112.5002:11
- Description
This video provides step-by-step repair instructions for replacing the drive belt on a Whirlpool washing machine. The most common reasons for replacing the drive belt are when the washer is making loud noise, won’t agitate, won’t drain, won’t spin, or won’t spin or agitate.
All of the information for this drive belt replacement video is applicable to the following brands:
Whirlpool, Maytag, Kenmore, Crosley, Inglis, Amana, Roper
All of the information for this drive belt replacement video is applicable to the following brands:
Whirlpool, Maytag, Kenmore, Crosley, Inglis, Amana, Roper
Step By Step Instructions
1
As with any repair, you should unplug the appliance before beginning
2
Turn off the hot and cold water supply valves.
3
To replace the drive belt on your washer, you should first disconnect the water supply hoses from the inlet valve. Be prepared for some water to spill out.
4
Now, use tape to secure the lid.
5
Carefully tip the washer forward so the front of the cabinet rests on a blanket or towel.
6
Now remove the screws securing the belt cover and pull the cover off.
7
If still intact, rotate the belt towards the drive pulley as you pull the old belt towards you to remove.
8
Install the new belt by first looping it onto the motor pulley.
9
Now loop the belt onto the drive pulley and rotate the pulley to fully align the belt.
10
Replace the cover and secure it with the screws.
11
Now carefully lift the washer to its upright position. and remove the tape securing the lid.
12
Reconnect the water supply hoses to the inlet valve and turn the water supply back on.
13
You’re now ready to plug the power cord back in and confirm that the washer is functioning properly.
Description
This video provides step-by-step repair instructions for replacing the drive belt on a Whirlpool washing machine. The most common reasons for replacing the drive belt are when the washer is making loud noise, won’t agitate, won’t drain, won’t spin, or won’t spin or agitate.
All of the information for this drive belt replacement video is applicable to the following brands:
Whirlpool, Maytag, Kenmore, Crosley, Inglis, Amana, Roper
All of the information for this drive belt replacement video is applicable to the following brands:
Whirlpool, Maytag, Kenmore, Crosley, Inglis, Amana, Roper
Step-By-Step Instructions
1
As with any repair, you should unplug the appliance before beginning
2
Turn off the hot and cold water supply valves.
3
To replace the drive belt on your washer, you should first disconnect the water supply hoses from the inlet valve. Be prepared for some water to spill out.
4
Now, use tape to secure the lid.
5
Carefully tip the washer forward so the front of the cabinet rests on a blanket or towel.
6
Now remove the screws securing the belt cover and pull the cover off.
7
If still intact, rotate the belt towards the drive pulley as you pull the old belt towards you to remove.
8
Install the new belt by first looping it onto the motor pulley.
9
Now loop the belt onto the drive pulley and rotate the pulley to fully align the belt.
10
Replace the cover and secure it with the screws.
11
Now carefully lift the washer to its upright position. and remove the tape securing the lid.
12
Reconnect the water supply hoses to the inlet valve and turn the water supply back on.
13
You’re now ready to plug the power cord back in and confirm that the washer is functioning properly.
Applicable Product Model
Parts Needed
Drive Belt
$32.42
Total$0.00
Related Articles & Videos
09:15
Part Replacement
Whirlpool Top-Load Washer Leaks? Replace Tub Seal Part # W10324647
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com