Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairLG Electric Dryer Control Board Replacement #EBR62707647
LG Electric Dryer Control Board Replacement #EBR62707647
Skill Level
Total Parts Cost
$175.25Estimated Savings
$112.5002:15
- Description
This video provides step-by-step instructions for replacing the control board on LG electric dryers. The most common reason for replacing the control board is when the dryer does not start and the knobs and buttons on the display board seem to work properly, but the door switch, belt switch, thermal fuse, and other more commonly problematic parts have been checked and are working properly.
All of the information in this control board replacement video is applicable to the following brands: LG
All of the information in this control board replacement video is applicable to the following brands: LG
Step By Step Instructions
1
As with any repair, you should unplug the appliance before beginning.
2
To replace the main control board on your dryer, first remove the screws securing the main top to the cabinet.
3
Slide the top back and lift up to remove.
4
Now release the control board wires from the retaining tabs.
5
Next, note the location of the wire connectors then depress the tabs to disconnect all of them.
6
Uninstall the mounting screw then slide the old board back to remove.
7
Install the new control board by inserting the tabs on the board into the slots in the side panel then slide the board forward.
8
Secure the mounting screw.
9
Snap all of the wire connectors into place.
10
Secure the wires under the retaining tabs.
11
Align the main top on the cabinet then push forward.
12
Secure the screws in the back.
13
You’re now ready to plug the power cord back in and confirm that the dryer is functioning properly.
Description
This video provides step-by-step instructions for replacing the control board on LG electric dryers. The most common reason for replacing the control board is when the dryer does not start and the knobs and buttons on the display board seem to work properly, but the door switch, belt switch, thermal fuse, and other more commonly problematic parts have been checked and are working properly.
All of the information in this control board replacement video is applicable to the following brands: LG
All of the information in this control board replacement video is applicable to the following brands: LG
Step-By-Step Instructions
1
As with any repair, you should unplug the appliance before beginning.
2
To replace the main control board on your dryer, first remove the screws securing the main top to the cabinet.
3
Slide the top back and lift up to remove.
4
Now release the control board wires from the retaining tabs.
5
Next, note the location of the wire connectors then depress the tabs to disconnect all of them.
6
Uninstall the mounting screw then slide the old board back to remove.
7
Install the new control board by inserting the tabs on the board into the slots in the side panel then slide the board forward.
8
Secure the mounting screw.
9
Snap all of the wire connectors into place.
10
Secure the wires under the retaining tabs.
11
Align the main top on the cabinet then push forward.
12
Secure the screws in the back.
13
You’re now ready to plug the power cord back in and confirm that the dryer is functioning properly.
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com